2_4680Z Posted November 23, 2011 Share Posted November 23, 2011 I have a 1973 240z. Looking for an R200 in good (provable) usable condition and all other parts associated with the swap. Ideally a 4.11 or a 3.90. I've seen what these go for and am looking for a Christmas present to myself. I may end up at the pick and pull. Thanks. Quote Link to comment Share on other sites More sharing options...
riverz Posted November 24, 2011 Share Posted November 24, 2011 I have one not sure the gear set in it but I have a 3.90 that is not installed. Also have axles, mustache bar, and flanges. Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted November 25, 2011 Share Posted November 25, 2011 pm replied Quote Link to comment Share on other sites More sharing options...
Guest skimattybee Posted November 28, 2011 Share Posted November 28, 2011 i have an r200 out of a 82' 2+2 with 3.90 with halfshafts, currently installed in my car but swapping in a 82 turbo setup with cv's Quote Link to comment Share on other sites More sharing options...
cockerstar Posted November 28, 2011 Share Posted November 28, 2011 PM sent Quote Link to comment Share on other sites More sharing options...
zentech Posted November 28, 2011 Share Posted November 28, 2011 On 11/28/2011 at 1:32 AM, skimattybee said: i have an r200 out of a 82' 2+2 with 3.90 with halfshafts, currently installed in my car but swapping in a 82 turbo setup with cv's Hey, i'm looking for an R-200 rear diff with 3:90 ratio. Is your diff still available shipped to 95368 and mileage on it ?? Quote Link to comment Share on other sites More sharing options...
Guest skimattybee Posted November 29, 2011 Share Posted November 29, 2011 i belive the car had 164,xxx on the od. it makes a bit of whining noise on hard acceleration, but that is easily fixed with new pinion bearings. might want to change out the u-joints on the halfshafts as well ( something i should have done before i swapped it into mine) ill check on shipping and get back with you Quote Link to comment Share on other sites More sharing options...
Guest skimattybee Posted December 7, 2011 Share Posted December 7, 2011 (edited) ive decided to stick with the half shaft setup. i have a r200 with 3.54 out of a 82' turbo car with cv's and companion flanges. the car had 116,xxx on the odometer if you are interested Edited December 7, 2011 by skimattybee Quote Link to comment Share on other sites More sharing options...
zentech Posted December 8, 2011 Share Posted December 8, 2011 On 12/7/2011 at 9:29 PM, skimattybee said: ive decided to stick with the half shaft setup. i have a r200 with 3.54 out of a 82' turbo car with cv's and companion flanges. the car had 116,xxx on the odometer if you are interested ONLY WANT 3:90 YOU CAN USE THAT IN YOUR TURBO 3:54=TURBO Quote Link to comment Share on other sites More sharing options...
cockerstar Posted December 8, 2011 Share Posted December 8, 2011 I have a 3.9 R200 here for $100 + shipping/PayPal Quote Link to comment Share on other sites More sharing options...
yem73z Posted December 21, 2011 Share Posted December 21, 2011 Hey I got a 350z diff available. Askin 250 shipped. Quote Link to comment Share on other sites More sharing options...
zentech Posted December 23, 2011 Share Posted December 23, 2011 On 12/8/2011 at 4:31 AM, cockerstar said: I have a 3.9 R200 here for $100 + shipping/PayPal What is the condition and mileage?? Shipped to zip 95368..let me know and thank you. Quote Link to comment Share on other sites More sharing options...
Chris Pine Posted January 19, 2012 Share Posted January 19, 2012 I have a 3.9 Long nose in SoCal if you are still looking Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.