Silver Mine Motors Posted August 27, 2012 Author Share Posted August 27, 2012 the kit will come with all the parts needed to complete installation. you will not need any other parts at all. your stock master cylinder will work perfectly with this kit. the kit comes with: 11.2" drilled and slotted zink platted front rotors 4-pot 43mm calipers Adapter brackets (high quality) Stainless steel brake flex lines All hardware Front brake pads custom t6061 aluminum spacers (they won't change your geometry) price of the kit is $655 plus shipping. this is a front brake kit. not rear So who wants one?? 1. QWIKZ (Rob) 2.POTENTIAL- abes 3. josh280z - in the future 4. 5. 6. 7. 8. 9. 10. Quote Link to comment Share on other sites More sharing options...
aarang Posted August 27, 2012 Share Posted August 27, 2012 +1 for me. Also maybe to lower the cost for some, would you be willing to sell the kit minus calipers/pads? Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 27, 2012 Author Share Posted August 27, 2012 so who wants one? 1. QWIKZ (Rob) 2.POTENTIAL- abes 3. josh280z - in the future 4.aarang 5. 6. 7. 8. 9. 10. i'm willing to sell the kit minus any parts you like. the kit would cost $485 without calipers and pads. Quote Link to comment Share on other sites More sharing options...
1QWIKZ Posted August 28, 2012 Share Posted August 28, 2012 Hey Edan, Is it possible to have a kit shipped out before the list is full? I realize that you would prefer to order the brackets in bulk...but I wouldn't need mine zinc plated (which is where the bulk order is likely needed). I would just paint it with caliper paint. My Z doesn't see anything other than sunny days so rust isn't an issue. I would really like to get the car on the track this season so the sooner I have them the better for me!! Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted August 28, 2012 Share Posted August 28, 2012 Put me down. Unfortunately I'm gonna be studying abroad in France from Sept to January, but ill be back at tw start of 2013. Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 28, 2012 Author Share Posted August 28, 2012 Rob, i'll see if i can make you just one pair of brackets. they probably will cost more. i'll let you know. 1. QWIKZ (Rob) 2.POTENTIAL- abes 3. josh280z - in the future 4.aarang 5.blue destiny in January 6. 7. 8. 9. 10. Quote Link to comment Share on other sites More sharing options...
1QWIKZ Posted August 29, 2012 Share Posted August 29, 2012 We have 2 for sure so far and a third for january so we are getting close.... C'mon guys! Let's get this done!!! Edan: let me know...like I said, I can do without the plating to offset the "1 off" cost...Thanks for looking I to it for me. Rob. Quote Link to comment Share on other sites More sharing options...
feifongwong3 Posted August 29, 2012 Share Posted August 29, 2012 I'll bite for this. My Rb20 swapped 280zx needs more front brakes. Put me down for a set that will fit the stock snowflakes though. Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 29, 2012 Author Share Posted August 29, 2012 (edited) double post Edited August 29, 2012 by bajaracer Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 29, 2012 Author Share Posted August 29, 2012 (edited) double post Edited August 29, 2012 by bajaracer Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 29, 2012 Author Share Posted August 29, 2012 i actually don't know if this kit fits the stock wheels. if i had to guess i would say some 15 inch wheels and all 16 inch wheels would fit, based on my experience. i don't have a stock rim to test it. some our other customer have remedied their rubbing problem by shaving some metal off the front of the caliper face, or adding a 1/4 spacer. with this kit you can safely shave off 5mm of metal off the face of the caliper. maybe you could first get a single bracket and caliper to test fit it before you buy the kit. Rob. i'll get back to you with an answer tomorrow, i just have to calculate the setup time and other factors. 1. QWIKZ (Rob) 2.(POTENTIAL)- abes 3. josh280z - in the future 4.aarang 5.blue destiny (in January) 6.feifongwong3 (if they fit stock wheels) Quote Link to comment Share on other sites More sharing options...
1QWIKZ Posted August 29, 2012 Share Posted August 29, 2012 Thanks Edan, I have my stock 1983 280 turbo wheels sitting in the garage so I can test fit those if I get my kit early... Quote Link to comment Share on other sites More sharing options...
ZUL8TR Posted August 30, 2012 Share Posted August 30, 2012 Are pics available yet? Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 30, 2012 Author Share Posted August 30, 2012 (edited) here are the calipers that will be used in the kit. here are the rotors. here is the entire kit installed Rob i still haven't got an answer for you. i'll try by today. Edited August 30, 2012 by bajaracer Quote Link to comment Share on other sites More sharing options...
Michael Posted August 31, 2012 Share Posted August 31, 2012 So these rotors are drilled for both 4 x 4.5" and 5 x 4.5"? Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted August 31, 2012 Author Share Posted August 31, 2012 yes they are drilled to two bolt patterns: 4x4.5 (stock 280zx bolt pattern), and 5x4.5 (which is 300zx, mustangs,ect.) Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted September 1, 2012 Author Share Posted September 1, 2012 ok guys i just decided to make 10 pairs of brackets. so that means there will be 10 kits available in around 6 weeks. i'll keep you guys updated... Quote Link to comment Share on other sites More sharing options...
aarang Posted September 1, 2012 Share Posted September 1, 2012 Should we let you know now what items from the kit we want, or wait until the brackets are done? Quote Link to comment Share on other sites More sharing options...
1QWIKZ Posted September 1, 2012 Share Posted September 1, 2012 ok guys i just decided to make 10 pairs of brackets. so that means there will be 10 kits available in around 6 weeks. i'll keep you guys updated... Sweet! What's your preferred method for payment and timing of payment? Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted September 2, 2012 Author Share Posted September 2, 2012 (edited) wait until i have the brackets ready to sell before you place your order. first i will make a single bracket and do a final test fit. once i see everything is perfect i will produce 10 pairs. then you can place your order. this whole process should take just over a month. if you guys want to buy the kit in separate parts i will have all the parts in the kit sold separately on the website silverminemotors.com once the kit is available. Edited September 2, 2012 by bajaracer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.