takayuki Posted March 18, 2013 Share Posted March 18, 2013 I think this is a new package this offer. has anyone bought and installed these? Looking for some feedback. http://datsunpartsllc.com/cart/index.php?p=product&id=214&parent=11 Quote Link to comment Share on other sites More sharing options...
Nigel Posted March 18, 2013 Share Posted March 18, 2013 (edited) While the parking brake cable clears the frame with the wheels off the ground, it likely going to rub with the car on the ground. The SMM kit is even worse for this. I changed things around on the SMM kit so that the cable was oriented like it is in the Datsun Parts kit, but it still rubbed. I was also worried about it drooping down and getting hit by my CV adapter flanges, so I had to rig up some springs to keep the cables up. I ended up making my own, longer cable to solve all of this. If you don't care about it rubbing, then this isn't an issue. Also, that Wilwood caliper has a smaller piston than the Mustang caliper used in the SMM kit, so you're not going to get as much brake torque. This will likely only be an issue if you're running Wilwood fronts with the 1.75" dia pistons though. Nigel Edited March 19, 2013 by Nigel Quote Link to comment Share on other sites More sharing options...
Miles Posted September 12, 2013 Share Posted September 12, 2013 (edited) Bumping this up to see if anyone has installed the Datsun Parts Wilwood caliper/parking brake kit. If so, any issues? Just got an email from Al at Datsun Parts. The calipers are huge and require a 17 inch wheel. Edited September 13, 2013 by Miles Quote Link to comment Share on other sites More sharing options...
rooger82 Posted September 18, 2013 Share Posted September 18, 2013 I have this kit installed in the rear. I think I was one of the first few to get it, was originally thought that 16" wheels would be ok but that was not the case. No issues with anything so far and I have had them on for at least 6 months now Unfortunately I have not tried another brake kit so I cant compare it to anything. The picture on the site with the black caliper is actually my setup. Quote Link to comment Share on other sites More sharing options...
Miles Posted September 18, 2013 Share Posted September 18, 2013 I have this kit installed in the rear. I think I was one of the first few to get it, was originally thought that 16" wheels would be ok but that was not the case. No issues with anything so far and I have had them on for at least 6 months now Unfortunately I have not tried another brake kit so I cant compare it to anything. The picture on the site with the black caliper is actually my setup. So 17 inch wheels is a reality. How is clearance between the caliper and the hub? Also, what did you have to do extend the parking brake cable? What front brake set up are you using? Thanks for posting. Quote Link to comment Share on other sites More sharing options...
rooger82 Posted September 20, 2013 Share Posted September 20, 2013 I am currently running a 16" wheel but I slightly grinded the top of the caliper and when the wheels were made I had to measure the inner diameter to be sure they fit. The caliper clears the hub with no problems. My brake kit was installed by R Rated Motorsports so I am not too sure on the procedure of extending the parking brake but I'm sure someone a bit more knowledgeable on that can chime in. I am using the Stage 3 front kit from Datsunparts llc as well. Make sure your using a proportioning valve with them to get the brake bias correct, Quote Link to comment Share on other sites More sharing options...
grretc Posted September 29, 2013 Share Posted September 29, 2013 I have direct contact with the person that's les the kit for al aka Datsun parts LLC. Much cheaper since you are dealing directly with the supplier. Quote Link to comment Share on other sites More sharing options...
Miles Posted September 29, 2013 Share Posted September 29, 2013 I have direct contact with the person that's les the kit for al aka Datsun parts LLC. Much cheaper since you are dealing directly with the supplier. Contact information? Ask the supplier to post in the vendors section with contact info, prices, pictures and specifications. Quote Link to comment Share on other sites More sharing options...
wickiewicked240z Posted September 30, 2013 Share Posted September 30, 2013 I know the vendor he's my friend he does all of the brake and suspension parts. He does good work and he can do custom brake setups. Quote Link to comment Share on other sites More sharing options...
brianZortiz Posted September 30, 2013 Share Posted September 30, 2013 (edited) Can you share contact info please! Edited September 30, 2013 by brianZortiz Quote Link to comment Share on other sites More sharing options...
Miles Posted September 30, 2013 Share Posted September 30, 2013 I know the vendor he's my friend he does all of the brake and suspension parts. He does good work and he can do custom brake setups. Please post your freind's contact information. Quote Link to comment Share on other sites More sharing options...
texis30O Posted September 30, 2013 Share Posted September 30, 2013 Don't keep stuff like that to yourself Quote Link to comment Share on other sites More sharing options...
wickiewicked240z Posted October 1, 2013 Share Posted October 1, 2013 Pm me and ill give you his number. Quote Link to comment Share on other sites More sharing options...
Rob L Posted October 25, 2013 Share Posted October 25, 2013 ^^^^ ya i would like that number too ...pm sent Quote Link to comment Share on other sites More sharing options...
PR280z Posted November 13, 2013 Share Posted November 13, 2013 PM sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.