mistah mofro Posted July 1, 2013 Share Posted July 1, 2013 Preferably L28 with square port and something I can just drop in. Don't need exhaust pr intake manifolds I have my own thanks! Looking in SF Bay area Quote Link to comment Share on other sites More sharing options...
zentech Posted July 1, 2013 Share Posted July 1, 2013 (edited) Preferably L28 with square port and something I can just drop in. Don't need exhaust pr intake manifolds I have my own thanks! Looking in SF Bay area What exactly are you looking for an L-28 block or L-28 cylinder head with sq ports ? Either way i have rebuilt short blocks 87mm bore with all new hard ware etc. Cylinder heads name it i've rebuilt headddssss. Edited July 1, 2013 by zentech Quote Link to comment Share on other sites More sharing options...
mistah mofro Posted July 1, 2013 Author Share Posted July 1, 2013 Looking for motor from valve cover to oil pan. Quote Link to comment Share on other sites More sharing options...
mistah mofro Posted July 1, 2013 Author Share Posted July 1, 2013 Bump! Quote Link to comment Share on other sites More sharing options...
NewZed Posted July 1, 2013 Share Posted July 1, 2013 (edited) There are some Z's in the CA wrecking yards. The EFI cars usually have decent motor life left since they were always "running when parked". Use Check Inventory. http://www.picknpull.com/ Edited July 1, 2013 by NewZed Quote Link to comment Share on other sites More sharing options...
mistah mofro Posted July 2, 2013 Author Share Posted July 2, 2013 Yeah but I don't wanna go through the trouble of removing 2 engines and installing one not to mention getting a truck, bringing tools, etc too much of a hassle. Anyways let me know guys Quote Link to comment Share on other sites More sharing options...
zentech Posted July 2, 2013 Share Posted July 2, 2013 Yeah but I don't wanna go through the trouble of removing 2 engines and installing one not to mention getting a truck, bringing tools, etc too much of a hassle. Anyways let me know guys O/K, this is what i have in my inventory. I have three L-28 rebuilt short blocks (1) F/54 block bored .020 with a polished crank installed with clevite bearings and dished pistons, new timing chain kit and gaskets, (2) F/54 block bored .040 with ITM pistons, polished crank and clevite bearings, (3) N-42 block bored .030 with polished crank, clevite bearings and Nylen dished pistons not yet installed made in Japan. The last two blocks can be completed within two days of order. With that said, i also have a very good used F/54 with flat top pistons i bought from a machine shop and can be a good candidate if you need a used block. I have four N/42 heads with different specs depending on what you want. One N-42 head set up for dished pistons and ported that will get you 9.5 to 1 i believe somewhere in there. Send me a p/m and i'll give you my address to come and see first hand. Later ! Quote Link to comment Share on other sites More sharing options...
zentech Posted July 7, 2013 Share Posted July 7, 2013 O/K, this is what i have in my inventory. I have three L-28 rebuilt short blocks (1) F/54 block bored .020 with a polished crank installed with clevite bearings and dished pistons, new timing chain kit and gaskets, (2) F/54 block bored .040 with ITM pistons, polished crank and clevite bearings, (3) N-42 block bored .030 with polished crank, clevite bearings and Nylen dished pistons not yet installed made in Japan. The last two blocks can be completed within two days of order. With that said, i also have a very good used F/54 with flat top pistons i bought from a machine shop and can be a good candidate if you need a used block. I have four N/42 heads with different specs depending on what you want. One N-42 head set up for dished pistons and ported that will get you 9.5 to 1 i believe somewhere in there. Send me a p/m and i'll give you my address to come and see first hand. Later ! Silenced ... Quote Link to comment Share on other sites More sharing options...
stravi757 Posted July 8, 2013 Share Posted July 8, 2013 you have a PM Quote Link to comment Share on other sites More sharing options...
zentech Posted July 8, 2013 Share Posted July 8, 2013 you have a PM Mofro, Stravi has a good motor for $400. I have bought several good parts from him before a good salesman.... Zentech. Quote Link to comment Share on other sites More sharing options...
casper9182 Posted July 10, 2013 Share Posted July 10, 2013 I got An L28 look in my parts for sale. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.