mr_han_solo Posted September 17, 2013 Share Posted September 17, 2013 My #1 carb is getting wayyy too much gas. I have posted the following video to demonstrate what it is doing:SU Carb - YouTubeThe #2 carb seems to be getting the right amount of fuel. I mean I don't see it flowing out like a geyser like the #1 carb is. I initially thought that the regulator was bad (i have an aftermarket electric pump), however since the #2 seems to be working right, I'm thinking something may be wrong with the #1 carb. Hope someone has some answers.Thanks. Quote Link to comment Share on other sites More sharing options...
KyleG Posted September 17, 2013 Share Posted September 17, 2013 Check your floats. One could be stuck or full of fuel and sinking. That could be the culprit. Quote Link to comment Share on other sites More sharing options...
mutantZ Posted September 17, 2013 Share Posted September 17, 2013 Mine was pouring out cause my float was adjusted wayyyyyyyy too low. So it never got close to the top to shut the fuel off. Also there might be a tiny piece of crud stuck in the needle. Quote Link to comment Share on other sites More sharing options...
Miles Posted September 17, 2013 Share Posted September 17, 2013 Go here and buy the video Just SUs: http://www.ztherapy.com/ It will teach you evrything you need to know about SU carbs. They sell SU parts too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.