vincentfox Posted November 7, 2014 Share Posted November 7, 2014 Just got my first car a 76 2+2 in decent shape with a little rust here and then will run sometimes! But the clutch has no pressure I'm not sure why the masters full and there are no leaks in the slave other than that the injectors are crusty and rusty plus I was wondering fuel system upgrades? Quote Link to comment Share on other sites More sharing options...
NewZed Posted November 7, 2014 Share Posted November 7, 2014 (edited) the clutch has no pressure I'm not sure why the masters full and there are no leaks in the slave - Has it been bled? The piston seal in the master could be bad and it's just moving back and forth, but not pushing fluid. There are two seals, a primary and a secondary. other than that the injectors are crusty and rusty plus I was wondering fuel system upgrades? What's not sufficient, that needs "upgrading"? How will you know if the upgrade is better? Good luck. Get the standard free downloads, from xenons30 and nicoclub. Maybe you should keep the console separate just for the plaque. http://en.wikipedia.org/wiki/The_Fleetwoods Edited November 7, 2014 by NewZed Quote Link to comment Share on other sites More sharing options...
Villeman Posted November 7, 2014 Share Posted November 7, 2014 wow, very nice i´m more than a bit jealous. Have fun Quote Link to comment Share on other sites More sharing options...
Tony D Posted November 7, 2014 Share Posted November 7, 2014 I want the Kubota... Quote Link to comment Share on other sites More sharing options...
vincentfox Posted November 7, 2014 Author Share Posted November 7, 2014 Thanks new zed ill try to bleed the slave it is just really hard to get under the car when I have no jacks right now Quote Link to comment Share on other sites More sharing options...
Tony D Posted November 7, 2014 Share Posted November 7, 2014 You can reach it over the fender well. Quote Link to comment Share on other sites More sharing options...
vincentfox Posted November 7, 2014 Author Share Posted November 7, 2014 Thanks Tony D ill try when I get home from school I have a four day weekend !!! Quote Link to comment Share on other sites More sharing options...
vincentfox Posted November 8, 2014 Author Share Posted November 8, 2014 the clutch has no pressure I'm not sure why the masters full and there are no leaks in the slave - Has it been bled? The piston seal in the master could be bad and it's just moving back and forth, but not pushing fluid. There are two seals, a primary and a secondary. other than that the injectors are crusty and rusty plus I was wondering fuel system upgrades? What's not sufficient, that needs "upgrading"? How will you know if the upgrade is better? Good luck. Get the standard free downloads, from xenons30 and nicoclub. Maybe you should keep the console separate just for the plaque. http://en.wikipedia.org/wiki/The_Fleetwoods I figured it out I tried to bleed it and I got nothing so I took off the master cylinder and the inner seals are wore out the fluid.was just pushing back and fourth so I'll get a new master,should I replace the slave at the same time? Quote Link to comment Share on other sites More sharing options...
NewZed Posted November 8, 2014 Share Posted November 8, 2014 Master and slave seals move the same distance and see the same fluid. Odds are they'll fail around the same time. Might as well do the hose also, it's probably cracking, Quote Link to comment Share on other sites More sharing options...
Tony D Posted November 8, 2014 Share Posted November 8, 2014 These are like The Sith, where there is a master, the apprentice is sure to follow... False economy to do master and not the slave. Do them both, and change to the SS Line while you're in there. Quote Link to comment Share on other sites More sharing options...
vincentfox Posted November 8, 2014 Author Share Posted November 8, 2014 the clutch has no pressure I'm not sure why the masters full and there are no leaks in the slave - Has it been bled? The piston seal in the master could be bad and it's just moving back and forth, but not pushing fluid. There are two seals, a primary and a secondary. other than that the injectors are crusty and rusty plus I was wondering fuel system upgrades? What's not sufficient, that needs "upgrading"? How will you know if the upgrade is better? Good luck. Get the standard free downloads, from xenons30 and nicoclub. Maybe you should keep the console separate just for the plaque. http://en.wikipedia.org/wiki/The_Fleetwoods last night I took the master cylinder apart and the piston was just froze I put it in hot water and soap cleaned it up and this morning it was free and works fine , now I have to be a monkey and put it back in the car Quote Link to comment Share on other sites More sharing options...
NewZed Posted November 8, 2014 Share Posted November 8, 2014 Don't forget that the seals need to generate pressure. Moving fluid at zero pressure isn't the same. They make rebuild kits, if you're trying to save money. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.