scottyMIz Posted September 13, 2002 Share Posted September 13, 2002 ok guys finally got a hold of the guy who made my fuel rail and he said that he would try to make a couple this week and he would make as many as he can for me so i'll update as soon as i get one and i need you guys to email me on who wants them so i can keep track. Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted September 14, 2002 Share Posted September 14, 2002 Lockjaw wants one. Quote Link to comment Share on other sites More sharing options...
fl327 Posted September 15, 2002 Share Posted September 15, 2002 im down. its the same one R0N runs right? if so, im all in. Quote Link to comment Share on other sites More sharing options...
slownrusty Posted September 15, 2002 Share Posted September 15, 2002 I'm interested too. Please let me know when you have pics avialable. Regards - Yasin Quote Link to comment Share on other sites More sharing options...
Tony240ZT Posted September 15, 2002 Share Posted September 15, 2002 I want one for O-Ringed injectors. I have a set of 440cc/min supra turbo injectors I'd like to install.. Quote Link to comment Share on other sites More sharing options...
opie Posted September 15, 2002 Share Posted September 15, 2002 I want one. Probably the o-ring version for some rx-7 inj 86-87 NA low impedence 460 cc. Doug. Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted September 15, 2002 Author Share Posted September 15, 2002 OK i will have to give him some o-ringed injectors and have him see if he can make the adjustments.Also with an o-ringed version i'll have to have him make a bracket to hold it down.Tony you might have to be the testor for the o-ringed version cuz i don't have any o ringed cars.I do have pics of my fuel rail yasin and len it is the same one ron wants.The pics are on my zdriver page let me find the link..... http://www.zdriver.com/rides/detailride.php?cat=1&relIdx=22&vehId=651 it's in there with my other pics Quote Link to comment Share on other sites More sharing options...
Cody 82 ZXT Posted September 16, 2002 Share Posted September 16, 2002 Hey Scotty, While your still in the fabrication stage you might think about making brackets for all the rails. I had one made similar to yours serveral years ago and kept having to replace the plastic hold downs for the injectors. After putting the brackets on it that proublem stopped. Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted September 16, 2002 Author Share Posted September 16, 2002 i'll look into that cody thanks,I haven't had any troubles yet the rail is very lite weight and the hoses take the beating as far as i know but it would be nice to have some brackets.I have to have them for the o ringed ones so the regular ones will use them the same too. Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted September 16, 2002 Share Posted September 16, 2002 My what a big TB you have. Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted September 16, 2002 Author Share Posted September 16, 2002 lol yep what tb do you have? did you upgrade at all lockjaw? Quote Link to comment Share on other sites More sharing options...
awd92gsx Posted September 17, 2002 Share Posted September 17, 2002 I have a billet fuel rail for O-ring injectors...if you'd like I have a couple of pics of it... Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted September 17, 2002 Share Posted September 17, 2002 I have a 240SX TB. Had to get the aluminum spacer made, you know the usual. Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted September 17, 2002 Author Share Posted September 17, 2002 bill i'd like to have those pics for referance:) and lockjaw i didn't need any spacer on mine just made the holes move in a bit and it bolted right up and used stock linkage and tps. Quote Link to comment Share on other sites More sharing options...
Tony240ZT Posted September 19, 2002 Share Posted September 19, 2002 How to mount a Mercedes EFI V8 65mm throttle body to Z manifold: Mounted a Z31 throttle linkage pulley, and stock TPS on other side after shortening rod. Ended up taking out the PVC port insert and capped it off with a 1/2" NPT plug. My orange car has one of these mounted to it. I got the idea from James Thagard. Quote Link to comment Share on other sites More sharing options...
Lockjaw Posted September 19, 2002 Share Posted September 19, 2002 YOur TB is bigger than mine. Actually I think the 89 240sx throttle body is a bolt up with the spacer. I took the thottle deal off the stock one and bolted it straight on. Tps straight bolt on although it is in a different position. Quote Link to comment Share on other sites More sharing options...
SHANE Posted September 19, 2002 Share Posted September 19, 2002 you guys do know that you can buy that same kind of fuel rail from Top End right? Quote Link to comment Share on other sites More sharing options...
scottyMIz Posted September 19, 2002 Author Share Posted September 19, 2002 really shane? do you have a link and is it round like mine? Quote Link to comment Share on other sites More sharing options...
SHANE Posted September 20, 2002 Share Posted September 20, 2002 try this http://www.racetep.com/frail.html Quote Link to comment Share on other sites More sharing options...
opie Posted September 20, 2002 Share Posted September 20, 2002 Isn't it 200 dollars though? It was 2 yrs ago. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.