CruxGNZ Posted April 10, 2005 Share Posted April 10, 2005 Scanned this from my Factory Service Manual 240Z Chassis Dimmensions (Remember to click on image to view larger image) 240Z General Chassis View (Remember to click on image to view larger image) !M! Link to comment Share on other sites More sharing options...
Jolane Posted April 10, 2005 Share Posted April 10, 2005 That is awesome. Thank you! Joshua Link to comment Share on other sites More sharing options...
2126 Posted April 11, 2005 Share Posted April 11, 2005 Great post Mat! Link to comment Share on other sites More sharing options...
Guest Blazer406 Posted April 19, 2005 Share Posted April 19, 2005 Awesome info!!!!!! Thanx Link to comment Share on other sites More sharing options...
KAZU Posted June 17, 2005 Share Posted June 17, 2005 Good info but I think some dimensions may be wrong. "B" points are under the engine mounts. My measurement is 492 mm, instead of 452.4. Please post here if you find false value on the drawing. Thanks. Kazu Link to comment Share on other sites More sharing options...
ARZ_ Posted September 19, 2005 Share Posted September 19, 2005 Thanks for the details. How long before your car runs? Have you ever considered taking it to the west Coast nationals? If so hope to see you there next year. AZ Link to comment Share on other sites More sharing options...
Guest texasthojp Posted February 14, 2006 Share Posted February 14, 2006 Thanks for posting the dimensions. It's been very difficult to find what the true stock ride height is for the 240z - until now. Link to comment Share on other sites More sharing options...
Custom Posted March 18, 2006 Share Posted March 18, 2006 hey anyone got one for a 76 280z 2+2? Link to comment Share on other sites More sharing options...
kcelectronics Posted March 18, 2006 Share Posted March 18, 2006 Hi this is what you need, sorry its upside down you will need to download it and turn it around. or email me and I will send it to you OK http://album.hybridz.org/showphoto.php?photo=6384&size=big&cat=500 Link to comment Share on other sites More sharing options...
Custom Posted March 18, 2006 Share Posted March 18, 2006 thats awesome thanks Link to comment Share on other sites More sharing options...
rubin Posted April 12, 2007 Share Posted April 12, 2007 I remember looking at these pics before but now they dont seem to be up any more. does anyone have a copy they could show by any chance? Link to comment Share on other sites More sharing options...
COZY Z COLE Posted April 12, 2007 Share Posted April 12, 2007 I remember looking at these pics before but now they dont seem to be up any more. does anyone have a copy they could show by any chance? All the posted links are good, what do you mean?? LARRY Link to comment Share on other sites More sharing options...
rubin Posted April 12, 2007 Share Posted April 12, 2007 sorry didnt realize i needed cookies on my bad Link to comment Share on other sites More sharing options...
ZT-R Posted January 12, 2008 Share Posted January 12, 2008 anyone have a picture of point "c" Link to comment Share on other sites More sharing options...
zgn Posted February 11, 2008 Share Posted February 11, 2008 This is what I have been looking for, Thanks! Link to comment Share on other sites More sharing options...
AkumaNoZeta Posted September 1, 2009 Share Posted September 1, 2009 The only thing I would add to the Chassis Dimensions would be the axle center lines. Link to comment Share on other sites More sharing options...
ZT-R Posted November 15, 2009 Share Posted November 15, 2009 where did the 280z dims go (different crossmember so different measurements in some places) Link to comment Share on other sites More sharing options...
cockerstar Posted October 6, 2010 Share Posted October 6, 2010 (edited) Does anyone have these images saved? The links appear to be dead for me. edit: I don't know if these are the same images or not, but I found these over at viczcar! http://www.shaun-maluga.com/Images/Z/Misc/RS30_Chassis_Dimensions.tif http://www.shaun-maluga.com/Images/Z/Misc/RS30_Chassis_Dimensions_pdf.pdf Edited October 6, 2010 by cockerstar Link to comment Share on other sites More sharing options...
blue72 Posted October 6, 2010 Share Posted October 6, 2010 Yup, pretty much the same image that was being referenced earlier in the thread. Link to comment Share on other sites More sharing options...
CruxGNZ Posted August 10, 2013 Author Share Posted August 10, 2013 I'll fix the links guys. Give me a few days and they should be working again. Sorry! Link to comment Share on other sites More sharing options...
Recommended Posts