johnc Posted August 16, 2005 Share Posted August 16, 2005 ARP 100-7708 12mm x 1.5p .509" knurl 2.5" underhead length - $11.95 pack of 5 ARP 100-7713 12mm x 1.5p .509" knurl 3.5" underhead length - $15.95 pack of 5. http://www.summitracing.com Quote Link to comment Share on other sites More sharing options...
Guest PROJECTRB240SX Posted August 16, 2005 Share Posted August 16, 2005 TRY THESE: http://optionimports.com/kiprwhsp.html Quote Link to comment Share on other sites More sharing options...
240Z_Master Posted August 16, 2005 Share Posted August 16, 2005 The 5 Lug 240sx Studs Are 12.85mm Knurl 12 X 1.25 I think these are the bad boys I'm looking for. Quote Link to comment Share on other sites More sharing options...
Guest PROJECTRB240SX Posted August 16, 2005 Share Posted August 16, 2005 What Size Spacers Are You Trying To Use? You Should Try Those Spacers I Posted.... They Have Studs Already Installed. SOME INFO: http://www.mackinindustries.com/wm/kics/widethreadspacer.html Quote Link to comment Share on other sites More sharing options...
240Z_Master Posted August 16, 2005 Share Posted August 16, 2005 I just got some studs from Autozone Part Number 98355 12x1.25 Knurl 12.85mm Length is 41.5mm Quote Link to comment Share on other sites More sharing options...
Guest PROJECTRB240SX Posted August 16, 2005 Share Posted August 16, 2005 What Did It Fit? Was It A 240sx One? Because I Know Of A Place To Get Longer 240sx Studs For Pretty Cheap. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted August 16, 2005 Share Posted August 16, 2005 For guys with rx-7 studs do you know how much longer are they compered to 300zx (z31) studs? Pics from recent ebay auction, just for reference. RX7 studs vs stock. Quote Link to comment Share on other sites More sharing options...
Owen Posted August 20, 2005 Share Posted August 20, 2005 I'm using the metric Summit ones, 3" long but with my wheels, they don't stick out at all. I did have trouble find the right wheel locks, because of the length. I wanted open ended ones but the people at Gorrilla are idiots and only refer you to a local shop who says "duh...???" I ordered the right conical ones from Summit and ground off the ends to make them open-ended. They are tack welded to the hub/stub axle from behind. If anyone's using Kyokugens, I hear the splines for the locks wear out or the keys brake easily, many complaints. FYI. Owen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.