Bimmerman Posted September 29, 2005 Share Posted September 29, 2005 I have been looking for one for about a month, I have seen the one on ebay but I don't want a 4.11. I live in GA and would be willing to drive or pay for shipping. I would perfer an LSD but if one it not available I will take a regular one. Quote Link to comment Share on other sites More sharing options...
Tim240z Posted September 29, 2005 Share Posted September 29, 2005 Have you heard of Junk Yards? Learn them, know them, love them....owning a Z car and visiting JYs at least once a month are a marriage that will never divorce.... Quote Link to comment Share on other sites More sharing options...
Bimmerman Posted September 29, 2005 Author Share Posted September 29, 2005 I have check most of them in my area I found 1 that said they could get me a lsd model but they want $700. Quote Link to comment Share on other sites More sharing options...
Tim240z Posted September 29, 2005 Share Posted September 29, 2005 damn.... Quote Link to comment Share on other sites More sharing options...
Bimmerman Posted September 29, 2005 Author Share Posted September 29, 2005 tell me about it if I have to spend that much I with go with a R230 Quote Link to comment Share on other sites More sharing options...
AK-Z Posted September 29, 2005 Share Posted September 29, 2005 the one that you saw, I assume that it was a 240sx. I beleive that some subarus came with a r200 don't know what ratio though. Try looking for 280zx also on ebay. I have one but I need it to do a swap from a r180 to a r200. there is a sticky somewhere that has most of the models that came with the r200 might want to look. Quote Link to comment Share on other sites More sharing options...
rudypoochris Posted September 29, 2005 Share Posted September 29, 2005 R200 LSD is expensive (in longnose form any way) so it will run ya about $500-800 there is one on ebay now search "300zx LSD" if you are willing to pay that. If you want an open diff find a 280z the one with drum brakes and take that r200. Make sure that has a stick shift though because i believe r180's came in auto 280z's. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted September 29, 2005 Share Posted September 29, 2005 Or you could get a 3.54 R200 that should run you $50-$75, then buy the LSD separately from http://www.differentials.com for $550 and all you would need is carrier bearings to install it. Probably run you $650 when its all done but at least the LSD would be new. Quote Link to comment Share on other sites More sharing options...
preith Posted September 29, 2005 Share Posted September 29, 2005 Have you heard of Junk Yards? Learn them, know them, love them....owning a Z car and visiting JYs at least once a month are a marriage that will never divorce.... Around here any yards with older Z's are few and far between. It's all late-model stuff to begin with and the salt gods took care of any real zcar market a long time ago. When ever I need a stock part, it's usually found on either ebay or zcar.com. One word of advice on ebay searching, my last R200 purshased from an auction on Ebay was titled "280ZX differential". Quote Link to comment Share on other sites More sharing options...
dsommer Posted September 29, 2005 Share Posted September 29, 2005 What ratio are you looking for? Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted September 29, 2005 Share Posted September 29, 2005 I have an R200 (3.54) you can have for $50 (what I paid for it). I live in Marietta. I originally got it from another member on the board, but now have decided to do an R230 swap. I also have the moustache bar and 280ZXT shafts.... Quote Link to comment Share on other sites More sharing options...
Bimmerman Posted September 29, 2005 Author Share Posted September 29, 2005 at this point it dosen't matter what gears, I will buy a set of what I want if I have to. Quote Link to comment Share on other sites More sharing options...
Bimmerman Posted September 30, 2005 Author Share Posted September 30, 2005 Brad-ManQ45 pm sent Quote Link to comment Share on other sites More sharing options...
zguitar71 Posted October 1, 2005 Share Posted October 1, 2005 You are better off doing what jmortesen said. The 3.7 R200 LSD from the 300 ZXT are getting old now and probabluy require some work to get them in good shape. New is the best way to go and IMO usually cheaper in the long run too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.