briann510 Posted November 11, 2005 Share Posted November 11, 2005 We are beginning our turbo project (expected 500+ hp) for our 240z and I have found a couple places that make custom intakes (Rebello, Lone Wolf and SFP can make them and Pallnet has some parts available as well we will be using), and a few places that have custom header exhausts also. I am not sure if SFP is still in business though as their website says closed on the products side. We are looking for any others besides the above mentioned companies or individuals out there that might do custom intakes for a turbo setup & also a custom turbo header to see what all of our options are. The stock turbo intake/exhaust manifold isnt gonna support our wanted HP. Getting all the parts together right now and hoping to have it done early next year. And if anyone is interested our triple Mikuni's/intake will be for sale later this year (wont be cheap) or early next year off our current engine. Thanks Quote Link to comment Share on other sites More sharing options...
Drax240z Posted November 11, 2005 Share Posted November 11, 2005 Hey Brian, I might be able to help you out with those projects. Contact me via email and we can discuss some options. (rich -at- zensport -dot- ca) Quote Link to comment Share on other sites More sharing options...
Silent Posted November 11, 2005 Share Posted November 11, 2005 im interested in the triples if/when you guys get read to sell em Quote Link to comment Share on other sites More sharing options...
wigenOut-S30 Posted November 11, 2005 Share Posted November 11, 2005 I would not trust SFP for any Z needs. I have personally seen the header they made Jon Taylor. It was horrid. they treated him wrong and wouldnt give him a refund. just store credit after several calls and a bunch of hassle. Others on here have had similar or worse problems with them as well. Good luck on the goals. Quote Link to comment Share on other sites More sharing options...
violacleff Posted November 11, 2005 Share Posted November 11, 2005 Hey Brian, are you going to be using the same bore block? I'm guessing lower compression pistons. Everyone trips over the 3.1 on boost. Just curious if you were going to do a 3.2 on boost. Quote Link to comment Share on other sites More sharing options...
EZ-E Posted November 11, 2005 Share Posted November 11, 2005 For any of that if he is still into doing it, you might want to talk to James Thagard, of http://www.speedshopthagard.com Hes made some very nice intakes and well check out his ttZ he had. All very nice. Quote Link to comment Share on other sites More sharing options...
Guest ON3GO Posted November 11, 2005 Share Posted November 11, 2005 ive been trying to get parts together so i can build my own intake manifold but i cant seem to find the V stacks or anything.. anybody know where i can get my own material??? thanks mike Quote Link to comment Share on other sites More sharing options...
briann510 Posted November 11, 2005 Author Share Posted November 11, 2005 We are using the 3.2 stroker we have in their now and will change the oil pan, drop the compression a bit, change the cam and just upgrade the rest to the turbo pieces as needed. deep six the dizzy and go with coil packs and probably either Haltech or Electromotive TEC3R. Quote Link to comment Share on other sites More sharing options...
240Z Turbo Posted November 11, 2005 Share Posted November 11, 2005 ive been trying to get parts together so i can build my own intake manifold but i cant seem to find the V stacks or anything.. anybody know where i can get my own material??? thanks mike Velocity stacks(non flanged are called "spinnings") http://www.twminduction.com/ Quote Link to comment Share on other sites More sharing options...
Sparks280zt Posted November 11, 2005 Share Posted November 11, 2005 I beleive PeteZ who makes the DPs for MSA is going to be producing SS tubular exhaust manifolds in the coming months. Quote Link to comment Share on other sites More sharing options...
Sparky Posted November 11, 2005 Share Posted November 11, 2005 I beleive PeteZ who makes the DPs for MSA is going to be producing SS tubular exhaust manifolds in the coming months. ! well carp! another thing to spend money on! thats just great. Quote Link to comment Share on other sites More sharing options...
akeizm Posted November 12, 2005 Share Posted November 12, 2005 Well I'll have to keep and eye out for that manifold. Want to get a full set of customs aswell. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.