Tim240z Posted November 19, 2005 Share Posted November 19, 2005 Been thinking about this and searching the internet, but have yet to find anything. Everytime a do a OEM conversion, I end up buying the FSM just to get the PCM pinouts and wiring diagrams. My last conversion (the 99 Burb drivetrain into my 71 C20), I bought the Helms manuals directly from Helms. The wiring schematics are terrible. So.....instead of buying the FSMs, is there a source for just decent wiring systems schematics? Surely someone out there specializes in wiring diagrams.....anyone know of a place to contact? Tim Quote Link to comment Share on other sites More sharing options...
Cody 82 ZXT Posted November 19, 2005 Share Posted November 19, 2005 I've never used it before but, I've heard you can find it here http://www.alldatadiy.com/ Quote Link to comment Share on other sites More sharing options...
80LS1T Posted November 19, 2005 Share Posted November 19, 2005 I used www.alldatadiy.com to wire up my LT1 when I switched from the speed density to the MAF system this summer. I personally found it very easy to use. It spilts up all the different system into easy to read diagrams. So you get a wiring diagram for Fuel, Ignition, Sensors, Emissions, Tranny, and etc... Makes it much easier to modify a harness when you only have to look at the stuff you need to. Guy Quote Link to comment Share on other sites More sharing options...
LS1 Z Posted November 19, 2005 Share Posted November 19, 2005 I have Alldata here at my shop. P.M. me what you need and I'll them faxed to you. If anybody out there has Mitchell on demand, They have good diagrams also. JOEY P.S. Going way back to Opel G.T. parts (sorry) I don't have any door regulators. If you come across anything else your missing, let me know Quote Link to comment Share on other sites More sharing options...
Tim240z Posted November 19, 2005 Author Share Posted November 19, 2005 Has anyone used these guys? http://www.ahdol.com/ Quote Link to comment Share on other sites More sharing options...
The Rototiller Posted November 20, 2005 Share Posted November 20, 2005 tim are you looking for stock wiring diagrams? www.autozone.com has almost every car listed in their repair section. the wiring diagrams on autozone.com are basic and easy to read. hope this helps michael rebello Quote Link to comment Share on other sites More sharing options...
Tim240z Posted November 20, 2005 Author Share Posted November 20, 2005 I went ahead and bought a diagram from http://www.ahdol.com/ I had an email with a 2MB pdf file within 1 hour...now that's what I call service. It was ~$14, and the diagrams are clear and concise!!! Tim Quote Link to comment Share on other sites More sharing options...
jaime240z Posted November 20, 2005 Share Posted November 20, 2005 Tim you could give this guy a try. I just bought a wiring file on cd-rom for the 240z. He has a ton of other models too. I haven't received mine yet so I can't comment on quality, but the prices are reasonable. http://stores.ebay.com/1eZwire_W0QQssPageNameZviQ3asibQ3astoreviewQQtZkm Quote Link to comment Share on other sites More sharing options...
datsunlover Posted November 22, 2005 Share Posted November 22, 2005 I just go straight to the dealer. From my expiriance, they can ussualy be a great help. Eg; My 350 in mazda conversion. I went up to the local Chev dealer, told the parts guy what I was doing, and after he got over the shock of it , dug up the factory wiring diagrams for me. (had to get it from a store room, as 89 and down isn't on their computers) I got copys of about 5 pages, and it lays out in good detail what does what, and which wire is what color. I basicaly spent a week splicing it into the mazda and although I had the mazda book, it was pretty much useless. IE I just 'found' what I needed in the mazda, and hooked it up to the chev ecu. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.