jtburf Posted August 22, 2010 Share Posted August 22, 2010 Hello all, Well I am back from my trip, I do have three pullers left so if anybody wanted to have one by Labor day I would suggest you purchase this week. Thanks, John Link to comment Share on other sites More sharing options...
dexman1 Posted October 20, 2010 Share Posted October 20, 2010 John, I just emailed you, do you have any more pullers? Link to comment Share on other sites More sharing options...
jtburf Posted January 19, 2011 Share Posted January 19, 2011 Hybrid Z gang, I am about to have another batch machined, if I could get a commitment from you all I will know how many to machine. Thanks, John Link to comment Share on other sites More sharing options...
PR280z Posted January 19, 2011 Share Posted January 19, 2011 What`s the cost on it? Link to comment Share on other sites More sharing options...
jtburf Posted January 22, 2011 Share Posted January 22, 2011 HYBRID Z FAMILY, I was notified yesterday that the main part will be ready to ship on Wednesday the 26th and I will have 3 unspoken for pullers. My item cost has risen so there is a price and warranty change, with shipping to your address via the United States Postal Service the price is now an even $50.00 (Paypal to jtburf@swbell.net)for a non replacement puller (no free all thread replacement at this price). This includes Puller assembly, usage instructions and shipping to the Cont U.S. If you experience a broken all thread (have not seen many failures since switching to hardened all thread) there is now a 15.00 fee which also covers shipping. With the up front cost and not having control over how people use the puller I cannot continue to offer free replacements. Hope you understand. Thanks, John Link to comment Share on other sites More sharing options...
jtburf Posted January 26, 2011 Share Posted January 26, 2011 I have 5 pullers ready to ship now 1/26/2011 Just let me know when you are ready. John Link to comment Share on other sites More sharing options...
jtburf Posted January 30, 2011 Share Posted January 30, 2011 Hybrid Z family, As I mentioned before I would donate a porition of the sale to the board so we all have a place to assist each other and I just wanted to reconfirm I am doing my part. Hello jtburf, Thank you for your donation of 20.00 USD. We look forward to improving the forums with your donation. HybridZ I currently have 3 pullers boxxed up ready for same day shipping and can have another 7 within 3 days. If you are planning a rebuild you might consider getting one whil I have them. Thanks again all, John Link to comment Share on other sites More sharing options...
xonix_digital Posted February 6, 2011 Share Posted February 6, 2011 (edited) Hey John, Tool worked like a champ. Heating the cast iron part was necessary but after that it slid out without much fuss. Gotta say I couldn't have done it without you. Thanks man! - Alex Edited February 6, 2011 by xonix_digital Link to comment Share on other sites More sharing options...
jtburf Posted February 6, 2011 Share Posted February 6, 2011 Hey John, Tool worked like a champ. Heating the cast iron part was necessary but after that it slid out without much fuss. Gotta say I couldn't have done it without you. Thanks man! - Alex Great news. Folks I will even supply my phine number so I can assist you in pulling the pins. I'm in the same boat as all Hybrid Z members, advise and assistance. Without those two we would simblg be a just another blog. John Link to comment Share on other sites More sharing options...
Guest HALLOWEEN Z Posted February 12, 2011 Share Posted February 12, 2011 I could use a puller I'm sending a pm Link to comment Share on other sites More sharing options...
Zee77 Posted March 29, 2011 Share Posted March 29, 2011 John, I too am interested in a puller...PM sent! Kevin Link to comment Share on other sites More sharing options...
dblanski Posted May 5, 2011 Share Posted May 5, 2011 Hi John, I'm interested in using the spindle-pin-puller! Do you have one available? Link to comment Share on other sites More sharing options...
jtburf Posted May 6, 2011 Share Posted May 6, 2011 Hybrid Z Gang, Only two left at this time, if interested let me know. Thanks, John Link to comment Share on other sites More sharing options...
jtburf Posted September 24, 2011 Share Posted September 24, 2011 Z'ers I have ten (10) fresh pullers ready for shipping now. When these 10 sell I'm not sure I will do this again. Same as before $50.00 gets you a complete tool and instructions plus a donation to the forum. Paypal is jtburf@swbell.net U.S. address only, all others will need postage calculations before payment is completed. Please know the one all thread is still in effect. Questions or concerns email me or pm. Thank you all. John Link to comment Share on other sites More sharing options...
nullbound Posted September 24, 2011 Share Posted September 24, 2011 PM sent for 1 puller. Thanks, Ryan Link to comment Share on other sites More sharing options...
jtburf Posted September 26, 2011 Share Posted September 26, 2011 PM sent for 1 puller. Thanks, Ryan Ryan, The puller is in todays mail! Thanks, John Link to comment Share on other sites More sharing options...
z240 Posted September 26, 2011 Share Posted September 26, 2011 I'll take one of those please. E-mail sent. Thanks! Jim Link to comment Share on other sites More sharing options...
503Alex Posted September 26, 2011 Share Posted September 26, 2011 I Paypal'ed you just now for one with my address. Thanks again for doing this! Alex Link to comment Share on other sites More sharing options...
jtburf Posted September 27, 2011 Share Posted September 27, 2011 I Paypal'ed you just now for one with my address. Thanks again for doing this! Alex Alex, It is on the way today. Thanks, John Link to comment Share on other sites More sharing options...
jtburf Posted September 27, 2011 Share Posted September 27, 2011 I'll take one of those please. E-mail sent. Thanks! Jim Jim, check your email and let me know. Thanks, John Link to comment Share on other sites More sharing options...
Recommended Posts