Jump to content
HybridZ

Z32 trans-to-L6 block, Version 2.


Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Yes and here they are:

 

Blue 18 tooth 3.72 diff

White 19 tooth 3.90 diff

Red 20 tooth

Purple 21 tooth

Orange 22 tooth

 

P/N 32702-F61xx where xx = no. teeth

I may have gotten the last white one.

 

Are these part numbers for the complete pinion assemblies or just the cogs. I went to the dealer and tried to purchase a 32702-02G17 pinion assembly and a 32702-F6118 (for a 3.7 diff) and they quoted me around $40 for each. I knew the 32702-02G17 number was the pinion assembly, but I though the 32702-F6118 was just an 18 tooth cog that I could swap out on the 32702-02G17 pinion assembly. So i'm thinking that the 32702-F6118 is a complete pinion assembly with an 18 tooth cog mounted on it already. dapiper, can you or someone else verify that this is correct so I can order the correct pinion assembly.

 

Thanks.

Edited by Hybrid240z
Link to post
Share on other sites
  • 1 month later...

The speedometer pinion needs to have the correct cog/gear that matches the gearing of the differential for the speedometer to read correctly. Take the speedometer pinion assembly out of the transmission and you'll see that it has a colored cog/gear on the end of it. Each color corresponds to a differential ratio as dapiper posted. You can swap out these cogs/gears to match your differential and have your speedometer read correctly.

Link to post
Share on other sites
  • 4 weeks later...

×
×
  • Create New...