240Z_Master Posted March 15, 2007 Share Posted March 15, 2007 Anyone ever got the Datascan to work with the RB25DET? Basically plugs into the Nissan Consult and go at at. I've tried to wire in a Consult plug into the RB25 harness but still trying to figure out the 5 consult wires. TX RX CLK Ground IGN Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 20, 2007 Share Posted March 20, 2007 Which series of 25 do you have? Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 20, 2007 Share Posted March 20, 2007 I can't be sure about series 1(I have a series 2), but if what I got can help... Rx: br./yel. pin21 ECU(or 71, not sure the writing is faded on the tag.) Tx: yel. pin22 ECU Clk: yel./red pin31 ECU Chk: yel./black pin47 ECU Ign: switched power from wherever you want. (-): Body. Quote Link to comment Share on other sites More sharing options...
240Z_Master Posted March 21, 2007 Author Share Posted March 21, 2007 I can't be sure about series 1(I have a series 2), but if what I got can help... Rx: br./yel. pin21 ECU(or 71, not sure the writing is faded on the tag.) Tx: yel. pin22 ECU Clk: yel./red pin31 ECU Chk: yel./black pin47 ECU Ign: switched power from wherever you want. (-): Body. I have a series 1, but I'm going to recheck those. I pulled up my manuals and am looking at the diagrams... I'll be able to plug into this next week. Thanks! I'll let you know how it goes. Quote Link to comment Share on other sites More sharing options...
ZDrifter Posted March 21, 2007 Share Posted March 21, 2007 Sounds like a sticky thread to me...I have a series 1 aswell and Im interested in what you come up with.. Quote Link to comment Share on other sites More sharing options...
Careless Posted March 21, 2007 Share Posted March 21, 2007 results results results! now now now! Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 21, 2007 Share Posted March 21, 2007 Nevermind series 1 or 2, the pins are the same at the ECU and the colors are right also. / | Rx|Tx|blank|blank|blank|Chk|Ign| | Neg|Clk|blank|blank|blank|blank|blank| Quote Link to comment Share on other sites More sharing options...
240Z_Master Posted March 22, 2007 Author Share Posted March 22, 2007 Nevermind series 1 or 2, the pins are the same at the ECU and the colors are right also. / | Rx|Tx|blank|blank|blank|Chk|Ign| | Neg|Clk|blank|blank|blank|blank|blank| What goes in the CHK? Quote Link to comment Share on other sites More sharing options...
240Z_Master Posted March 22, 2007 Author Share Posted March 22, 2007 Okay.... I think I'm going to have to work on the car a little bit right now since American Idol is on and I ... well let's just say I'm not watching it. Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 22, 2007 Share Posted March 22, 2007 What goes in the CHK? If by that you mean, what from the consult goes in Chk, I'll have to say "I don't know", cause I've never seen a consult in real. If what you say is that the consult wire has only 5 wires, then probably that Chk, means check and is probably used to jump with the Pwr to extract the codes manually trough the Check engine light. Quote Link to comment Share on other sites More sharing options...
ZXRockie Posted March 22, 2007 Share Posted March 22, 2007 did you ordered it from http://www.blazt.biz? they have good info related to the data scan. Quote Link to comment Share on other sites More sharing options...
Careless Posted March 23, 2007 Share Posted March 23, 2007 Okay.... I think I'm going to have to work on the car a little bit right now since American Idol is on and I ... well let's just say I'm not watching it. haha, my side was splitting when I read that in my email. Then i came in this thread and discovered I read it wrong. phew. Quote Link to comment Share on other sites More sharing options...
Administrators BRAAP Posted March 23, 2007 Administrators Share Posted March 23, 2007 I purchased the BlaZt NISSAN Data scan/ConZult from Jerry, a member here with a RB20 240 Z, and he is a dealer for BlaZt. I bought it for my Z-32. Jerry promptly replied to all of my questions in getting the full version of the Data scan up and running and, though I haven’t used the Data scan yet, it looks to be quite powerful useful for seeing where the engine is at in regards to its OE tune, which for some, will immediately be able to see where some advance tuning could unleash more performance. Right now I hope to have the full version of ConZult up and running today as I have some climate control diagnosing to do. A major thanks goes out to Jerry for his help. Anyone else using the Data Scan and ConZult on the Nissan vehicles? Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 23, 2007 Share Posted March 23, 2007 Not yet, but I wired the diagnostic plug in my harness in prevision for it... Quote Link to comment Share on other sites More sharing options...
jerryb Posted March 23, 2007 Share Posted March 23, 2007 Hey guys...I represent blaZt....if you have any question let me know and I will try to help...and yes it does work on a RB25DET. No problem! For those interested in a unit Im sure I can work out a forum price. Jerry Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 23, 2007 Share Posted March 23, 2007 Hey guys...I represent blaZt....if you have any question let me know and I will try to help...and yes it does work on a RB25DET. No problem!For those interested in a unit Im sure I can work out a forum price. Jerry Quote Link to comment Share on other sites More sharing options...
jerryb Posted March 24, 2007 Share Posted March 24, 2007 No fireworks!! haha..... Quote Link to comment Share on other sites More sharing options...
alexideways Posted March 24, 2007 Share Posted March 24, 2007 I would have put fireworks for sure, if I could have found some in the smiley list we have. Quote Link to comment Share on other sites More sharing options...
Careless Posted March 24, 2007 Share Posted March 24, 2007 just wondering if this is neccessary when you've got a standalone. what does the datascan or conzult offer in terms of monitoring that these higher-quality standalones dont? Quote Link to comment Share on other sites More sharing options...
jerryb Posted March 24, 2007 Share Posted March 24, 2007 I cant argue the strength of a stand alone. NDS is not so much a tuning tool but a diagnostic tool. In fact it wont work with stand alones because the data flows from different addresses. Rechiped ECUs will work....stand alone will not. But if gives alot of information on parameters that can be logged and compared against each other in order to assist in trouble shooting and directing your tuning resources. One thing I like is it will give you performance info like 0-60....this beats any seat of the pant wow thats faster feelings! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.