93anthracite Posted September 6, 2007 Share Posted September 6, 2007 Can anybody give me feedback on this company and their products, specifically their camber plates and the GC coilover kit. I know the owner is a member of HybridZ and I have heard great things about their service, I just want to hear any feedback from other Z guys on these products, as I am highly considering using them on my 73. http://www.technotoytuning.com/productlist.php?vehicleid=11 Quote Link to comment Share on other sites More sharing options...
Warren Posted September 6, 2007 Share Posted September 6, 2007 NO problems with the products or service that I'm aware of. I've got the top camber plates in my ZX...Gabe will treat you right and make sure you're happy. Good vendor. Warren Quote Link to comment Share on other sites More sharing options...
auxilary Posted September 6, 2007 Share Posted September 6, 2007 incredibly good and fast service, top notch products I bought the TC rods show above in red Quote Link to comment Share on other sites More sharing options...
mark Posted September 6, 2007 Share Posted September 6, 2007 I've got there TC rods. Very well made piece! Quote Link to comment Share on other sites More sharing options...
jkgts1 Posted September 9, 2007 Share Posted September 9, 2007 They are awsome, I have been buying AE86 parts from them for years without a problem. Quote Link to comment Share on other sites More sharing options...
Lunar240z Posted September 11, 2007 Share Posted September 11, 2007 superb customer service. well made parts. Quote Link to comment Share on other sites More sharing options...
streeteg Posted September 11, 2007 Share Posted September 11, 2007 hey dont mean to go OT but why is there a need for a weld on perch is the kits are made for our cars? Anyone have more info on doing this? Quote Link to comment Share on other sites More sharing options...
jkgts1 Posted September 11, 2007 Share Posted September 11, 2007 You mean the camber plates? Yeah they are made for the Z, but I think the way the top strut tower was designed there is not much room. All the camber adjustable plates that I have seen have been weld on. There used to be a write up on arizonazcar.com, but not sure if it is still there, check it out. Quote Link to comment Share on other sites More sharing options...
streeteg Posted September 12, 2007 Share Posted September 12, 2007 I mean the perches for the coilovers--- but I am assuming its the same deal--- Ill see what I can find--- anyone have a picture of what needs to be done? Quote Link to comment Share on other sites More sharing options...
auxilary Posted September 12, 2007 Share Posted September 12, 2007 because the stock spring perch is not perfectly flat, resulting in uneven seating area for the coilover sleeve. This piece is ground off, and an even ring is welded on in its place, providing equal pressure area on the strut housing. and also removes about .75 lb of unsprung weight off each corner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.