Guest 280ZForce Posted December 13, 2007 Share Posted December 13, 2007 One method is to put a Tee fitting in the lower rad. hose, near the frame rail. Run the heater hose along the rail and up the firewall to the existing heater outlet. The yellow ZX in my first post is done that way. Another method I saw was a tight brass 90 elbow in place of the existing straight nipple. It pointed down and 'just' cleared coil #1. There are other options as well... being creative is what its all about, yes? I've completely removed my heating system. therefore I plugged off the head in the back and also on the inlet, so no hoses to worry about there. Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted May 29, 2010 Author Administrators Share Posted May 29, 2010 There has been enough interest to build another small batch. 10 more ready for shipping. Please note: I have raised the price, but now include shipping. Quote Link to comment Share on other sites More sharing options...
280zbeeT Posted July 5, 2010 Share Posted July 5, 2010 wait so I can get the LS1 coil packs, wires and mounts here basically everything I need to setup ls1 coil packs? Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted July 6, 2010 Author Administrators Share Posted July 6, 2010 I am selling the mounts. I can source everything else for you, but it will cost more than sourcing it yourself. Quote Link to comment Share on other sites More sharing options...
280zbeeT Posted July 6, 2010 Share Posted July 6, 2010 mm okay thank you! Quote Link to comment Share on other sites More sharing options...
Slow_Old_Car Posted September 17, 2010 Share Posted September 17, 2010 still availible? Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted September 18, 2010 Author Administrators Share Posted September 18, 2010 Yep. Quote Link to comment Share on other sites More sharing options...
madkaw Posted July 13, 2013 Share Posted July 13, 2013 Back from the dead thread! I was surfing the net for a possible bracket, I should have known someone here had already thought of it! Got any of these brackets laying around? I plan on running d585 GM truck coils- are the same? They look a little different in the pics, but hard to tell. The ones I have have the heat sinks on the bottom. Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted July 14, 2013 Author Administrators Share Posted July 14, 2013 I don't have any left, but ZCCJDM might. Type "coil" in the search box and you'll find it... http://www.zccjdm.com/ The D585 coil wont work with this bracket. Quote Link to comment Share on other sites More sharing options...
madkaw Posted July 14, 2013 Share Posted July 14, 2013 Someone contacted me already about an extra bracket Thanks Quote Link to comment Share on other sites More sharing options...
Kirkster Posted September 19, 2013 Share Posted September 19, 2013 I don't have any left, but ZCCJDM might. Type "coil" in the search box and you'll find it... http://www.zccjdm.com/ The D585 coil wont work with this bracket. They HAD 2 left... Now only one... Quote Link to comment Share on other sites More sharing options...
Kirkster Posted October 2, 2013 Share Posted October 2, 2013 RTz do you have the specs for the standoffs and bolts as when I got the bracket from ZCCJDM there was only the bracket in the packaging... K Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted October 3, 2013 Author Administrators Share Posted October 3, 2013 RTz do you have the specs for the standoffs and bolts as when I got the bracket from ZCCJDM there was only the bracket in the packaging... .500" OD .250" ID .450" Long Quote Link to comment Share on other sites More sharing options...
wheee! Posted October 16, 2018 Share Posted October 16, 2018 I assume these are all gone, but does anyone have the specs to reproduce these? Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted October 16, 2018 Author Administrators Share Posted October 16, 2018 58 minutes ago, wheee! said: I assume these are all gone, but does anyone have the specs to reproduce these? Prints... L6 DIS Coil Bracket.pdf Quote Link to comment Share on other sites More sharing options...
wheee! Posted October 16, 2018 Share Posted October 16, 2018 54 minutes ago, RTz said: Prints... L6 DIS Coil Bracket.pdf That is downright generous of you! :tiphat: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.