Guest [200] Posted January 8, 2008 Share Posted January 8, 2008 Hey, Just a quick question... For those that have purchased RB30 blocks, how much did you pay for them? I am talking about short blocks here.. so minus the head and transmission... I am just curious to know... PM me if you like Quote Link to comment Share on other sites More sharing options...
Careless Posted January 8, 2008 Share Posted January 8, 2008 anywhere from 500 - 1000 or more. they WILL get sold. bottom line. it might take time so the sellers usually don't bottom out. I just sold two, one for 500 and one for 350, as a combo deal due to the condition of one of them, and the other taking space. You're in Australia... you can find one for about 50 bucks. Quote Link to comment Share on other sites More sharing options...
Guest [200] Posted January 8, 2008 Share Posted January 8, 2008 50 bucks? "tell him he's dreaming." Thanks... Quote Link to comment Share on other sites More sharing options...
Noddle Posted January 8, 2008 Share Posted January 8, 2008 ;840077']50 bucks? "tell him he's dreaming." Thanks... LOL Loved that movie.. Quote Link to comment Share on other sites More sharing options...
Careless Posted January 9, 2008 Share Posted January 9, 2008 ;840077']50 bucks? "tell him he's dreaming." Thanks... Aren't there any junkers in new south wales that you could get the engine from? My source just sent 6 of them over on the last crate. And he told me how much he paid. And I had a buddy in Australia willing to ship a single engine which he picked up for 100 bucks, but the shipping for a single engine would have been stupid expensive. Go around and see what you find. Just don't act surprised when you hear how cheap they sell for. Quote Link to comment Share on other sites More sharing options...
Stealth-Z Posted January 9, 2008 Share Posted January 9, 2008 I have seen them on ebay Australia with Buy it Now options for $50.00. While there is no Buy it Now option on these, here is what a quick search revealed. http://cgi.ebay.com.au/NISSAN-RB30-GQ-PATROL-ENGINE_W0QQitemZ170183419677QQihZ007QQcategoryZ149116QQssPageNameZWDVWQQrdZ1QQcmdZViewItem http://cgi.ebay.com.au/RB30-ENGINE_W0QQitemZ120208300326QQihZ002QQcategoryZ32063QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Quote Link to comment Share on other sites More sharing options...
Racinjitter Posted January 9, 2008 Share Posted January 9, 2008 also $50 USD or CAD would be close to $100 AUD? Quote Link to comment Share on other sites More sharing options...
Stealth-Z Posted January 9, 2008 Share Posted January 9, 2008 At todays exchange rate 1 USD = 1.13728 Australian Dollars (AUD) http://www.xe.com/ucc/ $50USD = $56.86AUD The U.S. Dollar is not doing so well these days. Quote Link to comment Share on other sites More sharing options...
Guest [200] Posted January 10, 2008 Share Posted January 10, 2008 Aren't there any junkers in new south wales that you could get the engine from? My source just sent 6 of them over on the last crate. And he told me how much he paid. And I had a buddy in Australia willing to ship a single engine which he picked up for 100 bucks, but the shipping for a single engine would have been stupid expensive. Go around and see what you find. Just don't act surprised when you hear how cheap they sell for. Yes I know. Some people accept beer as payment. I was more interested in what people were paying over there as I am doing some research to see if it is worth me sending some over for someone that might want them... Just need to work out on shipping costs more than anything else. Quote Link to comment Share on other sites More sharing options...
Stealth-Z Posted January 10, 2008 Share Posted January 10, 2008 ;840613']Yes I know. Some people accept beer as payment. I was more interested in what people were paying over there as I am doing some research to see if it is worth me sending some over for someone that might want them... Just need to work out on shipping costs more than anything else. Here is a breakdown of what I paid in 2004. The exchange rate was more in my favor at the time. Series II non-turbo short block off ebay (block, crank, rods, pistons, rear seal, and beat up oil pump) $305.00AU Shipping and handling from Australia $304.00AU Total $609.00AU or $439.20 US Dollars The block was picked up from the sellers door and loaded into a container consigned by Brennan International Brennan International Shipping Company charges into Port of San Diego Documentation $50.00 Terminal Handling Charge $45.00 Chassis Fee (No idea what that was) $2.00 Port Security Fee $25.00 Customs Exam $19.55 Total to Brennan $141.55 St. George Warehouse of Oakland Forklift $35.00 Customs Entry Fee $50.00 Documentation Fees $5.00 Handling In/Out-General $35.00 Total to St. George $125.00 Now on top of all the above, I drove from Sacramento to Oaklnd to pick it up. That was a 200 mile round trip. So figure about $25.00 for gas. The St. George customs entry fee was for filling out a single piece of paper that needed U.S. Customs clearance signatures. I had to drive a few miles to the customs office to get it signed. No big deal. As you can see, it ended up costing me around $730.75. All the above should give a good idea of what is involved. Shipping heavy items can be troublesome. RB30 motors may be cheap and plentiful in Australia but remember someone has to go through a lot of time and effort to ship it. The same holds true when shipping from Japan. I can see additional charges for a translation service already. Hope this helps answer some questions. Quote Link to comment Share on other sites More sharing options...
RUSSJZ-ZED Posted January 22, 2008 Share Posted January 22, 2008 The engines, complete with car (Commodore, or Skyline) can regularly be found abandoned, awaiting local council pickup,It's been over 20 years since they were a production item,and the cars they were in don't look like ever being collectors items.(It was the best engine ever fitted to the Commodore , when it was discontinued ,GM Australia went backwards to a Buick V6) At todays exchange rate 1 USD = 1.13728 Australian Dollars (AUD)http://www.xe.com/ucc/ $50USD = $56.86AUD The U.S. Dollar is not doing so well these days. This is probably an overinflated exchange rate, Oz dollar probably really worth 2 flat rocks,and if our new government displays the same financial genius that it displayed on previous times they were in power, one flat rock will be the rate in the near future. Quote Link to comment Share on other sites More sharing options...
Z24O Posted February 1, 2008 Share Posted February 1, 2008 i don't know why someone just doesn't ship a 20' container of rb30's AUS->USA so there are enough to go around for the right price Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted February 1, 2008 Share Posted February 1, 2008 i don't know why someone just doesn't ship a 20' container of rb30's AIS->USA so there are enough to go around for the right price Can you set this up for me please? I'll split the profit with you... Quote Link to comment Share on other sites More sharing options...
synthtk Posted February 4, 2008 Share Posted February 4, 2008 I would hop on a RB30 group buy Quote Link to comment Share on other sites More sharing options...
Racinjitter Posted February 4, 2008 Share Posted February 4, 2008 I would probably buy another, if the price is right. Quote Link to comment Share on other sites More sharing options...
idolizar Posted February 4, 2008 Share Posted February 4, 2008 RB30 are as cheep as chips here in australia! i got 3 at my house! two downstairs & 1 in my skyline! at wreckers/junkyard buy complete engine for $200-$500 blocks ell u can imagen how cheep they are! Quote Link to comment Share on other sites More sharing options...
Evan Purple240zt Posted February 5, 2008 Share Posted February 5, 2008 RB30 are as cheep as chips here in australia! i got 3 at my house! two downstairs & 1 in my skyline! at wreckers/junkyard buy complete engine for $200-$500 blocks ell u can imagen how cheep they are! I hate you! Quote Link to comment Share on other sites More sharing options...
idolizar Posted February 5, 2008 Share Posted February 5, 2008 i love you too mate! RB30 block / RB25 head you got your self one powerfull engine thats almost industructable! Quote Link to comment Share on other sites More sharing options...
alexideways Posted February 5, 2008 Share Posted February 5, 2008 I'd be in for one too... Quote Link to comment Share on other sites More sharing options...
idolizar Posted February 6, 2008 Share Posted February 6, 2008 try get 1 shiped over mate hell the shipping fee would cost more then the block itself, just make a fone call to an engine importer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.