77 280z restoration project

[z-ya]

I've never seen a S30 with Cragar SS wheels. They look cool on a S30. What 5 lug hubs are you runnning?

[shift00]

for the front I got hubs off a 84 300zx turbo. In the rear all I did was that the stub axle and brake drums to a machine shop and had them redrill the pattern to 5/4.5.

 

I've never seen a S30 with Cragar SS wheels. They look cool on a S30. What 5 lug hubs are you runnning?

[shift00]

Working on installing the door poppers and solenoid. I got it mocked up ran it through a series of test to see if it would continue to work...so far no problems. I will try and have some photos on here soon.

[shift00]

When I bought the type 2 air-dam and put it on for a test fit,  I did not like how far past the hood it went. So I cut approximately 3inches off the sides and shave the top to recess the air dam a little farther. This is how it turned out. 

[shift00]

Here's a look the the door popper system I have rigged up. You can't really tell, but their is a cable that hooks up to the locking mechanism where the outside door handles use to be. Next, I ran that cable down to the bottom of the door jamb where it hit s pulley. From their it changes directions and runs along the bottom of the door jamb to the solenoid. 

 

( you can barley make out the pulley in right hole in one of the photos attached)

 

Door popper worked great the hole where the rubber door stop use to be.