Ricky Ricer Posted February 15, 2010 Share Posted February 15, 2010 I paid about $500 for the pan and sump. Quote Link to comment Share on other sites More sharing options...
linluv84 Posted February 15, 2010 Share Posted February 15, 2010 I was holding out to find the best deal. Pat came to the rescue, but I would've been forced to pay $700+ otherwise. One of those "pay to play" kind of things... Quote Link to comment Share on other sites More sharing options...
BenJammin Posted February 15, 2010 Share Posted February 15, 2010 I'll take that to mean 'pan and pickup', but yeah, right there with you, with the pickup I'm into the setup for $460. Beyond that, I had two front sump pans that I was going to somehow frankenstein (with my amateur fab skills) into one rear sump Good answers, keep 'em coming! I paid about $500 for the pan and sump. Quote Link to comment Share on other sites More sharing options...
Ricky Ricer Posted February 16, 2010 Share Posted February 16, 2010 I'll take that to mean 'pan and pickup', but yeah, right there with you, with the pickup I'm into the setup for $460. Beyond that, I had two front sump pans that I was going to somehow frankenstein (with my amateur fab skills) into one rear sump Good answers, keep 'em coming! Doh! Yup, that's what I meant. Pan and pick up. Quote Link to comment Share on other sites More sharing options...
Ed260Z Posted March 10, 2010 Share Posted March 10, 2010 Its the same price as always, its a full custom kit with pickup to suit whatever motor you have, extreemly time consuming and high quality, nzd1850 including shipping. We can add breather fittings and/or oil temp sensor boss at no extra charge if required. Several sold to the US and Canada, very positive feedback. Rob No doubt that your pans are HIGH quality, but $1300 US is a lot of change. That's half the price of a front clip. Any chance you'll be making a more budget orientated pan? Something simple, not designed for an all out race motor. Quote Link to comment Share on other sites More sharing options...
BenJammin Posted August 19, 2010 Share Posted August 19, 2010 (edited) Well, maybe someone started a new thread or something, but I'll necropost here on this one... Anyone see McKinney's site lately? He's listing the new custom rear sump pan for the conversion! Don't kill the messenger when you see the price ------------------------------------------------------------------------------------------------------------ (EDIT: which is not too bad considering stock pans going for over $400 and other custom pans going for even more) ------------------------------------------------------------------------------------------------------------ (at bottom of linked page) http://www.mckinneymotorsports.com/prod_240+260+280Z+parts Edited August 21, 2010 by BenJammin Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted August 20, 2010 Share Posted August 20, 2010 Well, maybe someone started a new thread or something, but I'll necropost here on this one... Anyone see McKinney's site lately? He's listing the new custom rear sump pan for the conversion! Don't kill the messenger when you see the price. (at bottom of linked page) http://www.mckinneymotorsports.com/prod_240+260+280Z+parts Working on a steel pan and a second supplier on the alum pan to see if we can get pricing down a little, BUT you get what you pay for QUAILTY craftmanship cost... Mack Quote Link to comment Share on other sites More sharing options...
BenJammin Posted August 21, 2010 Share Posted August 21, 2010 (edited) Working on a steel pan and a second supplier on the alum pan to see if we can get pricing down a little, BUT you get what you pay for QUAILTY craftmanship cost... Mack Hey Mack, no problems here on your price. Would I like to see it cheaper? Of course! But I know what it takes to make something quality (and make it worthwhile to do so). I wasn't stomping on the pricing, I just know how people on the boards can be sometimes and didn't want to get flamed just for letting people know. Actually, with the stock ones going for over $400, and RIPZ pan going for more than yours, I think you aimed at the middle pretty good. Edited August 21, 2010 by BenJammin Quote Link to comment Share on other sites More sharing options...
fast-datsun Posted August 21, 2010 Share Posted August 21, 2010 Hey Mack, no problems here on your price. Would I like to see it cheaper? Of course! But I know what it takes to make something quality (and make it worthwhile to do so). I wasn't stomping on the pricing, I just know how people on the boards can be sometimes and didn't want to get flamed just for letting people know. Actually, with the stock ones going for over $400, and RIPZ pan going for more than yours, I think you aimed at the middle pretty good. Thanks!! We know times are hard out there and $$$ is tight, we will do our best to help the Z-guys be able to make ther dreams/plans come true. Mack Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.