MONGO510 Posted January 17, 2010 Share Posted January 17, 2010 Here is a link to my Camber Plate install. I hope this will help with your project. http://forums.hybridz.org/showthread.php?t=152093 Mongo:p Quote Link to comment Share on other sites More sharing options...
motoman Posted January 17, 2010 Share Posted January 17, 2010 That looks good. And it seems like you saved a lot of money by doing it that way too! Quote Link to comment Share on other sites More sharing options...
Dan Juday Posted January 17, 2010 Share Posted January 17, 2010 I mounted mine in a similar fashion, with a duplicate steel plate on the underside. Instead of welding the allen head bolts to the bottom plate though, I just cut threads into the 1/4" steel plate and threaded the bolts in from the top. It does make for a nicer looking install. GC goes to a lot of trouble to make such nice parts it seems a shame to cover them up. I notice your parts came with a nice GC logo and, what looks like, double hole oval shaped washers for the adjustable section. I'm I right on the washers? Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted January 17, 2010 Share Posted January 17, 2010 I think I will follow your lead. Excellant pictorial.... thanks! Quote Link to comment Share on other sites More sharing options...
MONGO510 Posted January 17, 2010 Author Share Posted January 17, 2010 Dan, you are correct on the washers. They came with the plates. 1/4" plate with true studs is a good alternative to what I did. My method required a few less steps, but was not better than your method in any way. Different paths to the same result! Thanks J., I was hoping to help clarify the install process, and cut down on the amount of searching required. Mongo Quote Link to comment Share on other sites More sharing options...
iBang Posted January 18, 2010 Share Posted January 18, 2010 Beautiful work. I like how you did that. Quote Link to comment Share on other sites More sharing options...
sbooth Posted January 21, 2010 Share Posted January 21, 2010 Nice work. I enjoyed your photo sequence. My GC kit came with the aluminum plates also but I had 3/16 plate steel dupes made and welded in after all stock mounting was cut out. The welds were beveled and dressed. Nice to see a different approach. BTW the aluminum plates are for sale. Sorry for the solicitation but I couldn't control the urge! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.