Rear Disc Brake Converison

[brianZortiz]

Hi, I am looking to do a rear disc brake conversion on my early 260z, I was looking around eBay and came accross this

http://cgi.ebay.com/ebaymotors/Datsun-Z-240Z-New-Rear-Disc-Brake-Conversion-Set_W0QQcmdZViewItemQQhashZitem5d27f979e6QQitemZ400102619622QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

I wanted an opinion from you guys if this is a fairly good or bad deal?

Thanks BrianZ

[stravi757]

Its pretty expensive. Go to modernmotorsports.com

 

All you really need are the custom brackets for the calipers. The 240sx calipers can easily be got from a junkyard and the z31 300zx rotors are cheap enough brand new.

[brianZortiz]

Thank You, I did go see the modern motorsport kit with a brembo 11.4 inch rotor for 435 and all you need is the 240sx caliper, is that what you mean?? Or just get the bracket then rotors and calipers??

Thanks brianZ

[junglist]

Its pretty expensive. Go to modernmotorsports.com

 

All you really need are the custom brackets for the calipers. The 240sx calipers can easily be got from a junkyard and the z31 300zx rotors are cheap enough brand new.

 

 

You also need the custom brake lines.

[CArFAn]

You can use the (neoprene) lines from any parts store the part number is on one of modermotorsport Customer installs. Thats what im using to get everything setup and going, and till i can put out for braided lines.