darkzebra Posted July 28, 2010 Share Posted July 28, 2010 I need to replace my timing chain and engine head gasket. Nissan OEM parts seems very costly. Any recommended or popular brand I can use instead of Nissan? Thanks for any suggestions. Quote Link to comment Share on other sites More sharing options...
stretchnuts Posted July 28, 2010 Share Posted July 28, 2010 Felpro makes some good stuff....not sure about timing chains though. Just google L28 or L28et gasket depending on what you got, there is a difference. Quote Link to comment Share on other sites More sharing options...
MazterDizazter Posted August 4, 2010 Share Posted August 4, 2010 Black Dragon auto had a good price on a full timing set, it includes the chain, tensioner, pulley, and guide for I wanna say around $100 Quote Link to comment Share on other sites More sharing options...
darkzebra Posted August 4, 2010 Author Share Posted August 4, 2010 Thanks. Bought a Tsubaki kit from Hybridz member. I think it is the same kit sold by Motorsports Auto. Would still like to hear recommendation on head gasket. My think my setup should support about 300 HP at up to 12 psi boost. Quote Link to comment Share on other sites More sharing options...
junglist Posted August 4, 2010 Share Posted August 4, 2010 You can still get Ishino head gaskets for like $20-25, which are the same as OEM Nissan...Ishino makes them for Nissan. Quote Link to comment Share on other sites More sharing options...
darkzebra Posted August 11, 2010 Author Share Posted August 11, 2010 You can still get Ishino head gaskets for like $20-25, which are the same as OEM Nissan...Ishino makes them for Nissan. Would this be good enough for 350 HP @ 12 psi boost? Quote Link to comment Share on other sites More sharing options...
woldson Posted August 12, 2010 Share Posted August 12, 2010 Headgasket survival is mostly up to the operator. Quote Link to comment Share on other sites More sharing options...
S130Z Posted August 12, 2010 Share Posted August 12, 2010 (edited) You could give the strongest headgasket in the world to Big Phil and I'm sure he would still find a way to blow it at 12 psi But I am running a Felpro on 15psi and have had no problems with it. It's all in your tune. And a nice set of ARP head studs never hurt. Edited August 12, 2010 by S130Z Quote Link to comment Share on other sites More sharing options...
darkzebra Posted August 13, 2010 Author Share Posted August 13, 2010 Thanks everyone. I guess I will settle for a good Felpro hasket. And I will have to pass on the ARP at this time - last time I looked at my unemployment check it just had food and rent marked on it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.