Jump to content
HybridZ

out with the old in with the new


Recommended Posts

the plan for this winter was to convert from the 6 speed to a auto and drop the car into the 9s, well fate had it that the old ls1 decided to have a oil pump failure and while it was caught instantly and caused no damage the ls1 was old and tired and in need of a refresh, so i decided to swap it out for a brand new 2005 Cadillac ctsv ls6 crate motor, this of course used my auto swap budget so i will be staying stick for the next season. i also had the turbo rebuilt and changed the exhaust housing to a larger ar to help with the ls6 higher revving and better flowing heads and cam combo. the motor should be in and fired up this weekend and i will post more pics and video as i get them, here is the only photos i have for now, the engine bay before being repainted, the old ls1 and the new ls6, i also am putting in a new stage 3 monster clutch while its apart. the power gain i get from the ls6 should also put me in the 9s in street trim so im not entirely bummed about not being able to convert to a auto. by the way the ls1 is for sale if any one knows of any one looking for one they can refresh, it has arp rod bolts, arp head studs, hardened push rods and ls6 valve springs already installed, it will need fresh rings and bearings and a oil pump. i am located in pa. i will update the thread with more photos soon.

IMAG0143.jpg

IMAG0142.jpg

IMAG0141.jpg

Edited by 240zRacer
Link to comment
Share on other sites

more photos, including the painted bay, the minty fresh rebuilt 72mm turbo now with a 96 ar ex instead of the 68 i was using. and a picture of the two turbos i had to choose from for this build.... i think the bigger one would work best dont you? by the way if any one is in need of smoking deals on new , rebuilt turbos or getting a turbo rebuilt contact me.

IMAG0145.jpg

IMAG0146.jpg

IMAG0147.jpg

IMAG0148.jpg

IMAG0150.jpg

IMAG0152.jpg

IMAG0153.jpg

Edited by 240zRacer
Link to comment
Share on other sites

yeah its ok its winter since i need time to save up for a ecm conversion and new tune. the current computer is a 98 version which is like DOS compared to the 2000 up ecm's which are like windows vista. so i need to have the harness re-pinned for a 2000 ecm and have the new ecm tuned. i could run it on the 98 with just a tune touch up but the new ecm will be smoother and able to better keep up with the new set up.

Link to comment
Share on other sites

  • 3 months later...

UPDATE....

 

went to newjersy this week to a place called east coast super chargers, i had them re pin my harness to update it to the 2000+ style and replace the old 98 ecm with a 2000+ style. they also replaced the thermostat with a 160 degree unit. before i went i also added a alcohol injection systems meth injection kit. so the car is officially done all thats left now is to see what she runs at the track when they open next weekend. i am hoping for 9.80s. it went 10.2 at 135-136 on the old ls1 set up and it made 510/545 the new set up made 600/645. i added a video in t he video section but here is a direct link to it, the current dyno session is at the end. enjoy

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...