Neverdone Posted March 5, 2011 Share Posted March 5, 2011 (edited) Hello all, I've been searching around for a quite a while on Hybrid Z and on the rest of the internet, but I can't seem to find the answer I'm looking for. I'm trying to convert my 240z over to CV joints using a Q45's shortnose R200. I plan on making these myself as I have access to heavy machinery and skilled welders to attach the plate the companion flange side I'm glad Ross provides this service for those who don't, but I don't need it. What I DO need however, is the length of the axle shafts to go between the Q45's inner CV joints that I will be bolting up. Every seems to say, "I got mine at Moser Engineer" Or, "I got mine at Speedway Engineering", and that's great...but what did you actually ask for? I can find the info on how thick the shaft should be and even how many splines are on it simple enough (I can always just go outside and measure with a caliper if I need to), but the length is something alluded me. I've heard the two shafts are of different lengths as well due to the R200 being offset to one side. If no one knows this info, or has it written down, or doesn't feel like disassembling their CV axle, even the compressed or extended length of the axle all put together would be of benefit. Thanks for the help hopefully! Edited March 5, 2011 by Neverdone Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted March 5, 2011 Share Posted March 5, 2011 I'd like that info myself. Hopefully somebody can post it for us.... Quote Link to comment Share on other sites More sharing options...
Neverdone Posted March 7, 2011 Author Share Posted March 7, 2011 Anyone? I know fully well someone has done this swap! Even just the length from output flange on the diff to the mating face of the companion flange that is currently on your car would help a little. Quote Link to comment Share on other sites More sharing options...
skully Posted February 9, 2013 Share Posted February 9, 2013 Anyone have this information? It seems to be a mystery no one wants to share. ??? Quote Link to comment Share on other sites More sharing options...
NewZed Posted February 9, 2013 Share Posted February 9, 2013 Pretty sure it's in member CrayZ's "Q45 LSD tearing up cages" thread, or at least it can be figured out from what he was doing. It's a recent thread. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.