Robftw Posted May 11, 2011 Share Posted May 11, 2011 20B-REW and harass everyone with the brap, 10,000 RPM+ redline all day long on a racing engine. and a really nice power/tq curve I miss my rx7 every day, it was the funnest car i've ever drove. You really should consider reading the rule books, though and go from there. Quote Link to comment Share on other sites More sharing options...
260DET Posted May 12, 2011 Share Posted May 12, 2011 Does Yurrup get the GM Ecotec V6? I have no idea what they are like but it's not on any lists here. Besides, anything but a rotor Quote Link to comment Share on other sites More sharing options...
2JZ260z Posted June 25, 2011 Share Posted June 25, 2011 (edited) I'm currently doing the 2JZGTTE swap in my 260z on stock twins and its a pretty fun little car, I've spent 8 so far, some of which has gone to my friends for helping me so much with fabrication, but the car screams! I know you said you're from out of the U.S. so RB parts may be more prevalent, but the 2J parts are easy to come by (for me atleast) and pretty damn cheap, not to mention alot of them can be interchanged with 1J parts. If you've got the money, I heard there's some 2J Bottom, 1J head thing you can do that makes for a pretty sweet combo. 2J all the way Video: Edited June 25, 2011 by 2JZ260z Quote Link to comment Share on other sites More sharing options...
Northstarninja Posted July 22, 2011 Share Posted July 22, 2011 Too bad you don't like RB's. If I had a 20k budget I'd look into a RB30det. RIPS has a sick rb30 powered s30 in New Zealand. Other than that, a KA24de will not hold the power you're looking for without a forged bottom end. The pistons in ka's don't like boost... A SR20det block can hold about 400-450rwhp before it should be sleeved for reliability. If you're gonna do a rotary, why not do a 4 rotor? Idk about prices in regards to rotory motors though... From what I've read you bolt the 4 housings together, but need a 4 rotor chankshaft... though with the custom parts it may be over budget. When you say "track" is it a circuit track, or a dragstrip? The application obviously makes a difference Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.