Jump to content
HybridZ
RA64

Jeep 4.0 swap?

Recommended Posts

Clifton    0
im sorry but ill speak my mind, any honda car is JUNK. and i dont know where your getting the jeep 4.0 was deprived was honda, crystler had no part of ford and ford had no part with crysler.

 

I'll speak my mind too then. Saying any Honda is junk when you drive this, come on.:shock: Don't be prejudice towards Honda. Technology, reliability, economy, pretty good HP/liter, what is junk about that?

 

zxcm3.jpg

 

 

 

 

 

 

 

.

Share this post


Link to post
Share on other sites
AK-Z    10
I'll speak my mind too then. Saying any Honda is junk when you drive this, come on.:shock: Don't be prejudice towards Honda. Technology, reliability, economy, pretty good HP/liter, what is junk about that?

 

zxcm3.jpg

 

 

 

 

 

 

 

.

 

I have to agree. They are usually junk because of the owners, not the manufacturers.

Share this post


Link to post
Share on other sites
blue72    12

Hey, my dad had a Buick 350 in his '66 Wagoneer. It ran great until you got it so vertical that it sucked all the fuel out of the float. Backing down a steep hill without power brakes or power steering makes for one exciting ride.

 

Back on topic though. If you were seriously looking to perform the swap then most of the bright points about the '91 and up H.O. 4.0 have been pointed out. Like I said before though, it all comes down to commitment, fabrication skill and the amount of cash/work you were willing to put into it.

Share this post


Link to post
Share on other sites
Guest michanic220   
Guest michanic220

hmm, I'm sorry. i left that painted a different color for a day.

because i didn't want the weather to get to it and rust it.

I'm in Florida, i ain't no Yankee like you northern idi..well you get the point.

I'm not a "know it all" i never claimed to know everything. in-fact there is alot i don't know. thats why I'm on here learning about it.

but jeeps are not running any kind of ford engine that i know or have ever heard of. out of all the research i have done..

you show me something that states factory specs of them having a FORD BLOCK in the JEEP and i will kindly say i was wrong.

and another thing, the 280zx is a POS.

Chinese fuel injected garbage. kinda the reason why it is sitting in the drive way and has been for a month. i post a few times to try to find out whats wrong with it. you guys are GUESSING. OK its your CHTS!!!! wow, guess what. i replaced it. SAME THING. hmm maybe its your water sensor? or your MAF whatever the hell a maf is. ohhh and thats when i get a post out. when i post i get bitched at by some "higher up" person on this site saying search first. and title your post so it can be found in later searches. you guys are the ones that will have the world running on computers one day because your too damn lazy to answer a few questions to help a guy out. this is a FORUM, this is not a damn dictionary. if it was I'd be on wiki or something. the money i spend on a sensor i can do a V8 swap. its ridiculous. but I'm not even going to bother doing that. i have it on craigslist to trade for another car. never again will i buy a fuel injected car unless its new and a good brand. ban me, doesn't really matter. do what you want. i will go on and do my own thing and find my own help because clearly you guys aren't helping. if anything the senior members of this site are the "know it all"

don't waste your strength replying. this is the last time I'm checking into this forum.

Share this post


Link to post
Share on other sites
Guest michanic220   
Guest michanic220

i love that..

i just love that.

when did i say i was doing the swap?

i posted another thread saying wouldnt it be cool to have a jeep engine in a Z car. use your lil search thing im sure you can find it.

BUT I CLEARLY STATED I AM NOT INTERESTED IN DOING THIS ENGINE SWAP.

 

and your daddy had a buick 350. 66, niceee. guess what. take your fuel injected car flip it upside down. wow! IT LEAKS OUT OF THE GAS CAP!

 

i've had enough of this.

if anybody that HAS helped me needs to get ofhold of me [email protected]

other then that. i wont be back.

 

 

 

 

Hey, my dad had a Buick 350 in his '66 Wagoneer. It ran great until you got it so vertical that it sucked all the fuel out of the float. Backing down a steep hill without power brakes or power steering makes for one exciting ride.

 

Back on topic though. If you were seriously looking to perform the swap then most of the bright points about the '91 and up H.O. 4.0 have been pointed out. Like I said before though, it all comes down to commitment, fabrication skill and the amount of cash/work you were willing to put into it.

Share this post


Link to post
Share on other sites
Guest michanic220   
Guest michanic220

this place is full of "that attitude"

as soon as i figure out how to delete my profile, it shall be done.

good day.

Share this post


Link to post
Share on other sites
Careless    217
i love that..

i just love that.

when did i say i was doing the swap?

i posted another thread saying wouldnt it be cool to have a jeep engine in a Z car. use your lil search thing im sure you can find it.

BUT I CLEARLY STATED I AM NOT INTERESTED IN DOING THIS ENGINE SWAP.

 

and your daddy had a buick 350. 66, niceee. guess what. take your fuel injected car flip it upside down. wow! IT LEAKS OUT OF THE GAS CAP!

 

i've had enough of this.

if anybody that HAS helped me needs to get ofhold of me [email protected]

other then that. i wont be back.

 

Cool, now I have an email for all those newsletters that I don't want to read and sites that I don't care to register using my own email or real information.

 

Thanks.

Share this post


Link to post
Share on other sites
frank280zx    6

and another thing, the 280zx is a POS.

Chinese fuel injected garbage.

 

I totally agree the 280ZX is completely POS ..... :) I mean who would want to own such a junker!!!! Like mister Tony D says .. GREAT drive-line donors!!

 

However the fact its in your driveway makes the Mechanic POS :P

Share this post


Link to post
Share on other sites
JSM    15
Cool, now I have an email for all those newsletters that I don't want to read and sites that I don't care to register using my own email or real information.

 

Thanks.

 

LOL, this was priceless!

Share this post


Link to post
Share on other sites
Scotty    10
I love know it alls... (directed at michanic220)

 

The Inline six AMC blocks were originally developed by Ford. You know, AMC, the same company that used early buick V6's in the CJ series etc.? That AMC, the company that used very little of their own parts to build a vehicle and outsourced a lot of it?

 

I'm a huge jeep buff, I own several and wheel the piss out of them off-road. I know what i'm talking about.

 

Actually, I think you may be mistaken.

 

AMC used most of their own parts (though they were manufactured by other companies as most parts are done today, they weren't FoMoCo, GM or Mopar parts) and were the first to do many revolutionary things (Full-Time 4wd in a passenger car, anyone?) AMC never used any FoMoCo or Mopar engines during their long run, however they did use a few GM and Audi engines (The Iron Duke and the aforementioned Buick V6, aswell as the Audi/VW 121 CI/2L engine.)

 

It's a matter of fact that AMC didn't need engines from other manufactures (well, maybe four cylinders, as they were behind the game in that aspect...) because they had remarkable engines of their own. Many of their engines are actually stronger than the "Big Three" counter parts because they used forged internals, while the others did not.

 

Many AMC's have touched into the 11's, and perhaps 10's, with out much effort. AMC's have earned their place time and time again; not every thing you hear about American Motors is correct.

 

Now on to the 4.0...

 

It's unlikely that the I6 the eventually because the remarkable 4.0 was based off from a FoMoCo engine. The 199, a 4.0l variant, was introduced in 1963, and as such, there had to have been planing years before that date. However, if you have some viable proof that this engine is based off a Ford design, I'd love to see it (note: try as I might, but I cannot get this statement to not sound sarcastic, though I am being sincere here; I'd love to read up on this!)

 

Now, to the original poster who wanted to swap a 4.0 into his car:

 

The 4.0L can be a performer, you just have to have the ambition to do so. Parts can be attained easily, one site that I know that carries plenty of Jeep performance parts in SummitRacing. Stroker kits, if you wish to go that route, can be had without much work at all; you can either buy a kit from a company like Hesco, or do the "258 piston rods and crank into a 4.0" method, and if you choose the latter, I can give you a link on how to do it, as there is one or two minor complications.

 

Turbo and Supercharger kits can be bought, but at a price. However, you could always fabricate your own with a Turbo from a Cummins or old school bus. :shock:

 

Sorry about this, I just found this topic while browsing google, and thought I would share. Hopefully this time I'll actually stay, as this forum has a tonne of useful information. :icon14:

 

Edit: Actually, I'll just post the links I was talking about

 

General Jeep Performance

http://www.jeep4.0performance.4mg.com/

 

From Junker To Stroker

http://www.angelfire.com/my/fan/stroker.html

Share this post


Link to post
Share on other sites
blue72    12

I find it interesting that even the most insane Jeep 4.0L stroked and bored to 5.0L only produces around 300 horsepower (well, they can have almost 400ft lbs of torque though). That's with a big cam, ported head, 11.1:1 compression ratio, better intake and exhaust systems and all the other goodies thrown in for good measure.

We've got N/A 3.1L Nissan motors here making just as much horsepower with a little less torque.

There are plenty of web pages out there with 4.0 stroker buildup info on them, and it made for some good reading as I've got a '92 XJ.

I still don't see it as an economically feasible alternative in a Z. It would be an interesting exercise in "look what I did" though.

Share this post


Link to post
Share on other sites
Clifton    0
I find it interesting that even the most insane Jeep 4.0L stroked and bored to 5.0L only produces around 300 horsepower (well, they can have almost 400ft lbs of torque though).

 

If the heads flowed worth an S it would be alot higher. There's a reason people do LS, JZ, ect swaps and not Jeep 6 swaps:biggrin:

Share this post


Link to post
Share on other sites
seanof30306    10
Actually, I think you may be mistaken.

 

AMC used most of their own parts (though they were manufactured by other companies as most parts are done today, they weren't FoMoCo, GM or Mopar parts)

 

Of all the cars I've owned, my absolute favorite was my beloved '73 Gremlin X, especially after the 304 puked and we put in a 401.

 

The factory rearend was a Chrysler unit; unfortunately not a Dana 44 or 60.

 

The 9" rearend out of a 69 Mustang was a direct bolt-in, as the Gremlin was designed around the '69-'79 Mustang floor pan/rear subframe assembly. AMC got a great deal on the dies and jugs as Ford redesigned the Mustang for '71.

 

Both the 304 and the 401 came with FoMoCo/Holley 4bbl carbs,

 

The ignition was Chrysler.

 

The transmission was a T-10 with a Ford bolt pattern.

 

A Hurst shifter for a '69 Mustang was a direct bolt-in, and 20 bucks cheaper.

 

The clutch disc and pressure plate were Chevy-pattern. Ordering them for a Chevy saved 50%; they were the same thing.

 

Automatics for AMC V8s were Chrysler 727 Torqueflights.

 

The driveshaft used Mustang u-joints in the rear, Challenger/Cuda u-joints in the front (I think. not sure, but I know they were mismatched from other manufacturers)

 

The blower motor was a Chrysler, as were most of the switches in the dash.

 

The fact is, AMC saved a lot of money by raiding other automakers' parts bins. It was often cheaper to pay the licensing fees for parts than it was to design their own. I don't think that is bad.

 

In their day, the AMC dog-leg port heads for the 390 and 401 flowed more air, and made more power than any other manufacturers' small block heads. It wasn't till the Chevy Vortec head, which came out more than 20 years later, that the other manufacturers began to catch up.

 

I loved the fact that my Gremlin had superior engineering in it's AMC-specific heads, and cherry picked the best from other manufacturers. That Chrysler ignition was better than GM or Ford's. That Ford Super T-10 was bulletproof. I always preferred Chevy-style diaphram pressure plates to Ford 3-arm ones. Finding a 9" posi out from under a 69 or 70 Mustang wasn't that tough, it bolted right in, and no C-Clips to worry about.

 

I miss that Gremlin to this day. Before I changed directions, I was keeping my eyes open for a Spirit to stuff a 401 in. I saw one at a Year One show in Braselton a few years back, and was amazed by how good they look when you fix the nose-high stance. They also weigh 2500 lbs with the same wheelbase the Gremlin had, and they're not nearly as ugly.

 

As far as the 4.0 into a Z? I don't get it. Right before I left Atlanta, I went to the Friday night test and tune at Atlanta Dragway one last time. While I was waiting in the staging lanes, I started talking to a guy in the next lane with a 71 240. He'd transplanted the engine, tranny, and rearend out of a late 70s, early 80s Z. Liiking under the hood, it was nothing special, Although it was a FI Turbo) and he swore it was stock. We ran down together. I pulled him out of the hole and cranked off a 12.90 .... he passed me at the 1000 foot mark and ran a 12.60, or 70, I believe. And he'd driven the car down from Greenville!

 

My point is, with so many much easier choices, I just can't see going to all the trouble to fit an engine that only makes 190 hp. I love the 4.0 in my Jeep .... but I love it in my Jeep, not anything else. You might love a stripper when you're at the club stuffing dollar bills in her underwear, but at Thanksgiving dinner with your family? Not so much.

Share this post


Link to post
Share on other sites
Scotty    10

Yes, "most" was the wrong word, "many" was more along the lines of what I was aiming for.

 

However, I feel that the main emotion of my article shown through. AMC had a lot going for it, and my main attention was directed to trying to respond more towards the mood of ZedNotZee's post.

 

Though, it is possible that I misread it, as is not uncommon with me. :?

 

Also: I may have underestimated of their tendency to use parts from the "Big Three", and I may have gotten a little carried away, as I often tend to do. :icon12:

 

It is also true that theirs are many better choices than the 4.0, I was just pointing out that the 4.0 is capable of decent numbers, if one so chooses to go that route.

 

Me? I'd swap in something else.

Share this post


Link to post
Share on other sites
HowlerMonkey    12

A co-worker put a kenne bell supercharger on his jeep and it came as a kit with much larger injectors.

 

I figured he would be belching smoke and he did..........for a couple of drive cycles and then the car ran just fine with zero ecu tweeks and continues to be a daily driver six months later.

 

The Jeep ecu is not to be underestimated in it's abilities......regardless of the fact that they were made with not so good components.

 

I've been really busy trying to hire on another technical support guy at our ecu rebuilding facility but this needs more looking into.

 

What I am finding is that chrysler and GM ecus are a whole lot more than most people think function wise.

 

 

That said..............anybody have a 401 steel crank?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×