Jump to content
HybridZ

DUDE

Members
  • Content Count

    43
  • Donations

    0.00 USD 
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by DUDE

  1. DUDE

    Grommets

    Does anyone have a diagram or a list of all the grommets and seals that at 240Z needs or where I could obtain that information ? I am needing every bit of rubber on my car but I want to make sure that I get every one that I need
  2. Ok this is great I will see what I can pull together thank you
  3. Any chance that there is a way I can locate the pics you posted on this set up? im now at this wall and have noooo idea what to do
  4. Yes that would be great! can you please send me a message to Buzzyme Zcar , and can you give me your FB name so I can try to locate you and send you a message in case you cant find me? Any help would be great and much appreciated so thank you
  5. Yea im sorry I have been physically unable to do anything for the past 8 years, but now im trying to tackle this but found this same problem I have placed the emergency caliper on to the rotor but I haven't the slightest clue how to place the cable since it seems to be to short and there is nowhere to mount it? I was hoping to copy your plan to have some success? is there no way for me to see pics on this site that are that old?
  6. Yea im sorry I have been physically unable to do anything for the past 8 years, but now im trying to tackle this but found this same problem I have placed the emergency caliper on to the rotor but I haven't the slightest clue how to place the cable since it seems to be to short and there is nowhere to mount it? I was hoping to copy your plan to have some success? is there no way for me to see pics on this site that are that old?
  7. Hello im glad I found your post because im now dealing with this issue but do you happen to have more pics so I know what parts to buy and how to install? im more of a visual person
  8. Ok thanks for input 👍🏼
  9. Good idea but was told the undercoat would conceal it
  10. Good thought I will do my due diligence checking
  11. I can’t catch a break 😅 ok I will rip it off and hunt some rust
  12. OK I will add this onto another step that I have to do , Thank you for the info hopefully there’s not any bad rust where I have to replace the floorplans
  13. I was cleaning out the inside of my car took off the seats checking for rust and as I was doing so I found on top of the floor pans there was hard rubber that seems to be stuck on top of my floor pans and in certain spots at the edges you could see small rust spots. My question is should I rip off this rubber to get to the floor pans to see if there’s any more damage? I posted soon pics and I put a screwdriver parsley underneath the rubber to show what I’m talking about — At first I thought it was the metal until I found out that it’s molded on top off the floor pan kind of like a sticker
  14. DUDE

    Platting

    Grannyknot ok well I guess I just have to prioritize witch ones I would like done?
  15. DUDE

    Platting

    I am tearing down my 70 to 240z and before I put it together I want to get some parts plated just wanted to know if anyone happens to have a list of every part that I can get plated on my car before I put it all together?
  16. Scarab73 You make a valid point I can least look into it a little further maybe rent a welder practice a little and see if I feel comfortable with that idea thanks for the push! 😬
  17. Ok good advice peeps and after looking into all my options and advice I think I might have to bite the bullet and see about paying to get it done 👍🏼
  18. Hello I have never welded before and was hoping that you all can tell me if I should buy a "mig welder" and attempt to spot weld my entire car myself? If so any ideas of the most inexpensive machine and possible advice on how to learn to do myself?
  19. Does anyone know the size, length ,and pitch of the bolts that hold the bracket for the compressor on in L24 engine?
  20. sweet I will take a look at them and see if I can apply that to my project thanks!
  21. Thank Llava for all that info the only lucky part is I will be using the original engine but as for welding the brackets together heck ya I will take you up on that offer! 😀 I will see if Pancho can get me the sizes to get that done 👍🏼😬
  22. Hello sir

    I entered a post but last time I did it incorrectly, just wanting to know if I did it write this time? 

    1. seattlejester

      seattlejester

      Post looks good! I think troubleshooting looks like it would be the right location. Just want to make sure you aren't in the FAQ section of the forum when posting.

    2. DUDE

      DUDE

      Should I repost it into the "troubleshooting" section? or could you move it there?

    3. seattlejester

      seattlejester

      You did post in the troubleshooting section. I think that is fine.

  23. I have purchased the vintage air 2 for my 70 to 240 Z I was hoping someone knows the specs/measurements for the brackets to install the unit under the dashboard I cannot weld so I’m trying to just put together steel brackets and put them together to fit but I could use some help with how far up and down place it in side to side so I’m not spending an arm and a leg on the brackets. Or if anyone has got extra ones welded I’m willing to purchase them ?😀
  24. CalZ thanks and sorry my brain acts up a lot LOL Yes you’re right compressor 👍🏼😬
×
×
  • Create New...