DAT240Z

I'm looking for a set of triple Weber 45 for my current build Please send P.M of what you need have.

I am looking for a cylinder head for my build prefer a N42 but also consider an E88 Please contact me at Dat240z73@aol.com and send pictures if possible

Im looking for a good set of 280zx turbo CV Axels. Anyone have a set at a goood price

I am looking to get Rota Rb 15 x 7 FOR my 68-2000, can someone tell me the measurement of the center cap. Height and how big the opening is in the wheel where the cap seat into. I know the cap will not fit on the front hub as the hub is longer than the cap, I want to find and placement cap.

Three s30's one -1970 two -1971

Yes they are. Great sounding speakers

I hear my stereo just FINE

Thanks to all that responded. I installed my stereo last Nov. went with Alpine 6 1/2 components up front Infinity 6 x 9 in the back and 12" sub in the spare tire well. I must say it turn out better than I expected. I really like it. Thanks Check out my pic's. in the album section

When I did my turbo swap years ago this the what I used for my wiring You need to get a Haynes manual for ’79 to ’83 280ZX. This is the one with the red cover. Look on page 252, this is the wiring diagram. You will see 3 plugs labeled “1,2,3” with circles around the numbers. This is at the lower left-hand side of the page. The wires are as follows: Plug 1= BR 12v power source. Positive G 12v power source. Positive Plug 2=Y start signal (+) GL ground for inhibitor switch YW speed sensor (not necessary) Y A/C signal (+) YW coil (-) B fuel pump ground if using modulator Plug 3=LR fuel pump relay G ignition .signal (+) for air regulator W not used Y not used BW ignition signal (+)