pallnet

Working working working fellas. Thanks for the orders. I'm always happy to make them for you guys. Thanks again pallnet

I recieved an email from a new member that asked me if I'm still around so I figured I would throw a post on here. I know there's not a whole lot of demand for "L" rails these days but I will gladly make an "L" fuel rail for your project. Thanks pallnet

Sir Sounds good. Thanks pallnet

Sir Just the hubs and caps. What kind of price are we looking at for 4 of them at a time shipped to 70458? I wouldn't mind getting a few sets. I know that 4 can fit in a flatrate post office box and ship for $16.00. Thanks pallnet

I'm in the market for a set of good J30 front hubs for a fair price shipped to 70458 Thanks pallnet

Update: Fellas, everything has shipped out as of Saturday morning 06/15. So watch your mail because most will arrive this week. Thanks pallnet

Update: If you placed an order just recently, sit tight I'm waiting on a supply delivery to complete some orders. Thanks for the patience fellas. pallnet

1 Week is not enough time.. It takes 4 days to a week when shipping over a fistfull of states. pallnet

Fellas, I'm still hard at it. I replied to all emails and thanks for orders placed. Working in the shop late evenings keeps me from having to watch American idol with my wife..... Thanks again fellas. pallnet

Tony we are deep into crawfish season around here and we're eatin good... I took my little girl crabbing 2 weekends ago and we didn't do so well because it was a little early to catch them in shallow water. I recieved a text from a buddy of mine with a pic attached to it yesterday. It was a HUGE blue crab sitting almost on shore in a duck pond he hunts. Man I hear people all the time saying they hate crabs because they are a pain to clean but no problems here my friend.. I will catch and eat as many as I can get my hands on...

motomanmike Your emails are in my junk folder with what is said to be spam according to my filter. Please send me an email with some sort of "fuel rail" title attached to it. Thanks pallnet

UPDATE: All is well. At this moment if you placed an order with me it has shipped and is in route. I went to the post office this morning and dropped off the last of the orders placed before today. I had a small situation where I misplaced an order sheet with a fistfull of orders on it but as soon as i realized this i hit the shop for a few late hour evenings to get it straight. I'm sorry that I'm not on the forums a lot these days. I'm still around so just send me an email or two, I will get back to you as soon as I can. JIC some of you don't know that it's crawfish season down here in Louisiana and also the crabs are gonna be running soon so between work, fuel rails and fishing my butt off, I will be insanely busy.. Thanks pallnet

UPDATE: Working on a fistfull of rails this week. Sorry but I don't get much time to post on forums. I get emails at least one a week asking me if I'm still around well I'm still here fellas so call on me if you need. Thanks pallnet

Sir I see a major issue that needs to be addressed right away. You need to remove the JB weld from the inside of the intake because it will end up breaking loose and pces will go into your engine. pallnet

Very nice. You may need to trim your fuel hoses down a little because of bracket height. Good luck pallnet

Tony How much insurance you want on your package? pallnet

UPDATE: I will be shipping a fist full of orders that were placed recently, I'm dropping them off at the shipper on Monday morning. Here are a few pics of a special project that I'm wrapping up. Thanks y'all. pallnet

Sir Sorry but I don't do intake work right now, not even for myself because of my work schedule and time restaints. It's sad because I have mant things i want to do to my own car and it's being neglected. If you smooth your intake manifold or have it done you will be able to keep your cruise control as long as you have the vacume port needed to operate the solinoids. Yes you can reuse your injectors including the coldstart injector. You will need a barbed rail setup to do so. You will want to inspct/replace injector hoses or clamps. I sell an injector seal kit that is a complete direct replacement injector seal set. Email me for the complete price list. pallnet@hotmail.com

Sir Please email me again you're email may have gone to my spam box accidently. Please email me again and I will gladly answer you're questions. Thanks pallnet

Sir Send me a PM or an email and I will get back to you. I can make the rail to your needs. Thanks pallnet

UPDATE: I have been a little too busy to update lately but I'm still here if anyone needs me. Family, work, fuel rails and fishing has been keeing me busy. Thanks pallnet

Update: All orders that were placed in the last couple of weeks are being dropped off at the shipper Saturday the 18th during my lunch break. I wanted to get them out sooner but I have been terribly busy with work. Thanks pallnet

Sir I still make fuel rails if you want to buy new. Email or PM me. Thanks pallnet

Sir Where is the air leaking out during the leak down test? I would be willing to bet that if you have the timing correct and there are no other issues then your HG is not sealing since you pulled the head bolts out to remove the towers. I don't remember off hand. Is the MN47 cam intermaly oiled or externaly oiled? If it's internaly oiled then the cam towers didn't didn't need to be touched, remove the hood, loosen the mounts and lift the motor a little as needed. If you swapped to a spraybar style then yes they would need to be removed but in that case it's best to remove the head. pallnet

UPDATE: I have the first fistfull of Z31 fuel rails being completed this week. They look good and they look like they will take care of your needs. I will be selling them in 11mm and 14mm injector types. The Z31 rail kit comes with (2)custom machined fuel rails, (4)custom bent and bored mounting brackets, (4)6an end fittings(while supplies last) and stainless mounting hardware. Keep in mind that some injectors are taller than others, I have slotted the bracket holes for this reason. Depending on the injectors being used you may have to install a spacer inbetween the upper and lower intakes. Here is the link for a spacer kit: http://store.acadianasportscars.com/ Email or PM me for prices and more info. Thanks pallnet@hotmail.com