Jump to content
HybridZ

Turbo260Z

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by Turbo260Z

  1. I believe these come out of 74 260z 2+2 4-speeds 79 280zx 2+2 4-speeds Thanks! -Kevin
  2. I have a full P90a head in Orlando FL
  3. I have one. Just to be clear... you need the driveshaft off a 280zx turbo coupe? I'm from Orlando FL
  4. Looking for CV conversion parts or full kit. I already have 300zx cv shafts so looking for the proper length shafts and companion flanges for 260z (27 spline). or full swap. Let me know what you have! Thanks! Will sell 300zx CVs if I get a full swap -Kevin
  5. Do they still function and are not rusted? basically do each of the parts still spring back and forth with no problems? If so any pics? what would you want for them shipped?
  6. looking for either new or good condition used door and hatch alignment strikers. the ones with the springs and plastic guides. I don't need the dovetails or parts on the door that make contact, I have those. I just need what's in the bottom of the fist pic and what's in the second pic. Shipped to 32812 Thanks!
  7. Turbo260Z

    Emblems

    Looking for Brand New OEM emblems. or used but look like they are out of the box specifically: 2 new rear quarter 1 hood emblem, Z badge prefered 1 FairladyZ badge for rear spoiler Shipped to 32812 Thanks!
  8. I have one for sale. I'll be taking it out of my early 260z in a couple of days to replace it with a Z32 trans. It grinds when going into 3rd and 4th but doesn't have any wining or knocking noises in gear. Comes with a high dollar MGW short throw shifter and custom driveshaft. As well as the mount. PM if interested!
  9. Looking for the rubber pieces the are behind the hatch hinges. Both sides
  10. I have them both. Also the MAF is actually a AFM (air flow meter) which is what I have. unless some one converted a 300zx turbo MAF on your motor.
  11. Looking for a good set of doors, can either be complete doors or door skins for early 260z. Thanks! Orlando, Fl
  12. I have one, it's on my car now but putting in a metal one. The bottom where the airdam attaches to is cracked apart but I drilled new holes for the airdam
  13. I have a complete running 1983 280zx turbo car I'm selling. 4K and is in good shape
  14. Looking for Passenger front turn signal out of a 240z/260z. Its okay if the cover is cracked. Let me know what you have! Also the bulb plug if you have that as well. Shipped to Orlando, FL 32812 Thank! -Kevin
  15. Was in more of a time crunch then expected so I ordered both seals. Thanks "Thezechone" for the recommendation. I was on there a week ago with a whole list and put it off until today and now half of them aren't available including the damn windshield seal!
  16. Looking for the front and rear glass seal. I need ASAP Price shipped to Belle Isle, Fl 32812 Thanks! -Kevin
  17. Looking for the piece of the roof that connects the hatch and has the dips that hold the hinges.it also holds the dome light. Mine was rotted out from not having the upper hatch seal and collected water in the hinge dips. would prefer the piece to be cut with the top of the roof and rear hatch seal, hatch mounting points in 1 piece.
  18. I have an 83 turbo distributer for sale
  19. Looking for a longer throttle rod. the piece between the firewall linkage and manifold linkage. I'm using the same rod on my 260z l28et that I was using with the SU's. With the N42 intake manifold it just barely reaches between the firewall and linkage to the manifold. Maybe I need a rod from a Fuel injected motor I would assume. Intake manifold is an early non webbed n42 from a 75 280z. price shipped to Orlando, Fl 32812 Thanks! Kevin
  20. UPDATE: I have changed the dead time on my ms3 to 1.000ms from the previous 1.200ms, and it has significantly improved starting the car as sometimes it would take long cranks.
  21. Thank you! I appreciate it. I've also posted on the rx-7 forum incase anyone has any idea over there
×
×
  • Create New...