Jump to content
HybridZ

Warren

Members
  • Posts

    619
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by Warren

  1. Man, the chilling memories for me that you just brought back in this thread. I remember when mine did the same thing after a complete rebuild. Scared the livin bejezis out of me...just KNEW that something major was wrong. All it turned out to be was fuel fouled plugs in mine too. New set of plugs, and VROOM...

     

    Took a second look at the pictures and noticed the distributor cap on the shock tower with the hose going under it and said "WTF?"

     

    Good job on getting it going, now put all of those wires and hoses where they're supposed to be (HA, like you weren't planning on doing that). I'm still trying to find good ways to hide some of the crap in my engine bay...it seems to take forever, but that's only because I'm never satisfied.

     

    Warren

  2. That's one of the reasons I recommended the LM1 setup. Datalogging is built in and no laptop is "required" while it's logging. The LM2 is now available and has alot more features, like the built in auxbox features, but it's kinda pricey too.

  3. Actually, if you're referring to the black strip that runs along the outside edge and is about 2" wide by the length of the T-Top, it's not plastic. It's aluminum. The bubbles are from oxidation. If you use a razor blade (or similar object) you can remove the black paint from it, then use a roloc disk on a air die grinder and remove the corrosion (it'll look like white crap). Smooth out or fill any imperfections (use JB Weld to fill), sand smooth, and repaint them with ordinary Duplicolor gloss black paint. They'll come out looking new. Don't ask me how I know.

  4. Thanks Davy, your'e right...I almost broke my own arm patting myself on the back for getting it down the track 8 times without "HAVING" to open the hood. Tried to do it right, and so far, it looks like I did. Realization of the dream is just around the corner...hehehe

     

    Practice trees are fun, but in real life, when you're on the track, staging the car, your heart starts beating faster, the adreneline starts flowing, you hope everything works and your reaction times suffer. Seat time does help and getting in a routine of what to do when starts making it easier, but just starting out, trust me, you'll be nervous too.

  5. No need to make this a pissin match guys...Settle down. The way the original post was worded, one could assume that I was referring to the same run, and the correlation between RT & ET could have been misconstrued. I editied that just now to read (on yet another run). You're both right, and either way, all of the numbers mentioned came from 8 different runs.

     

    Remember FUN!!! and what Momma used to say... "If you can't say something nice..."

  6. Yeah, the 0.096 RT and the lower ET were on 2 different runs anyway...and I AM aware that they're not related to each other. Just thought I'd point out the improvements...and forgot to mention that I finally had a less than 2.0 sixty foot (1.915 to be exact)...

     

    Between taking it somewhat easy on the car by keeping the boost down, learning to launch it, doing trial and error things, basically checking everything out, I'm having fun with my car and keeping the hood closed, so don't be so quick to try and come rain on my parade...it's all in fun anyway.

  7. There were only like 40 cars at the track...and the track was hooking up GREAT. No slippin & slidin all over the place, and yes this was Silver Dollar.

     

    I made 8 passes, cut a 0.096 light on one of them (a true FLUKE, trust me). Bettered my low ET by 29 thousands on yet another run. Car ran consistant as possible. Unfortunately, for some reason, I couldn't get the laptop to connect to the datalogger to retrieve any data (serial port issue on the laptop), so I couldn't do any real tuning. Howver, I did manage to remember to hit the record button 7 of 8 times :) . Nonetheless, with some decent tuning and a wastegate spring change, I'm more than sure the car has low 12's, maybe high 11's in it. (Keep in mind guys, I'm doing shakedown stuff right now, as the car only has 200 miles on it since it's completion. Better safe than sorry, hence the 2.5 lb wastegate spring - changing to 12 lbs now that I know everything is working and appears to be holding together).

     

    Now to go get all the black rubber off of my white car... gotta love those "battle scars"..hehehe

  8. I recently had a situation where it would have come in handy to have been left on the motor. It was about 96 degrees outside and I had been running the car kinda hard, staying in boost alot during some spirited running around town. I parked the car to visit a friend of mine for a few minutes, came back out to the car and it was VERY hard to start...Felt the fuel rail and it was warm enough that you didn't want to hold on to it. I put a small fan blowing air over the motor, pointed at the fuel rail. As soon as the fuel rail cooled enough to hold on to without being in pain, the motor fired right up and ran perfectly. So, in actuallity, it might be ill-advised to remove it entirely, However, most people think it's some sort of hair dryer or something and pull it off. It really does serve a purpose if left alone.

     

    Needless to say, I'm contemplating re-installing it and forgetting about the "looks"...

     

    As always, your mileage may vary.

  9. It's an injector/fuel rail cooling device that is only supposed to come on AFTER the engine is turned off. It has a timer, located under the right side of the dash (I believe, don't remember exactly), that keeps it running for 16 minutes, but it'll only come on if the engine reaches a certain temperature. It does NOT function while the engine is running and most people remove it entirely, however, it's real purpose is to avoid vapor lock in the injectors and fuel rail after you turn the engine off and it heat-soaks. Sometimes, in warm climates, the fuel can boil in the rail and injectors after it's been run, causing a hard-start situation when trying to restart the motor before it's had time to cool.

     

    Refer to EFEC-77 of the 82 FSM for more information.

  10. Guys,

     

    Let me first say Thanks, sincerely, for all of your condolences, well wishes and prayers. Hearing from the overwhelming number of you that have replied has helped very much in starting the healing process. I've passed along all of your replies to the family and we all wish to let you know how much it means to us that you'd take the time to include us in your prayers and briefly mourn with us.

     

    We laid Lane's body to rest this afternoon during a beautiful ceremony with the knowledge that he's in a better place than us and we all look forward to him meeting us beyond the pearly gates when our time comes to rejoin him.

     

    It's been a very somber and sobering experience for all of us. Your standing by us in out time of grief and sorrow has deeply touched us all.

     

    Again, Thank You, and May God Bless You All.

     

    Warren

  11. Folks,

     

    Please bare with me as I try to get through this.

     

    I'm not a very open person when it comes to talking about family, but by sharing this with you, my "internet family", I can only hope that it might bring to light just how fragile life is and how much we need to make the time to cherish our loved ones.

     

    Saddest of all notices

     

    22 year old Elisabeth Mallows is my stepdaughter from a prior marriage. We are VERY close. My 17 year old daughter Melanie who lives with me is her half sister (same mother-different father).

     

    3 year old Lane was just at my house, swimming in my pool the weekend before. He was with his father and grandfather (on that side of the family) at a resort when this occurred.

     

    The message I'm trying to convey here is for everyone to stop and smell the roses, while you can, with ALL of your loved ones. You never know when something like this can take them away from you.

     

    Thank you in advance for letting me post this. I needed the vent, if nothing else.

     

    Rest In Peace, Lane. You will forever be missed.

     

    Warren

×
×
  • Create New...