menzzer37

Any ideas? I have reinstalled the firmware. Please help!

The RPM is there, yes, but I do not have a stim. The LED is not blinking on the ECU while cranking. Is that a problem? I found a thread about possibly a burnt injector driver. Could this be an issue? They are low z injectors, but I have it set for that (I believe).

Hi guys, I could use some help as I have exhausted my resources on injector debugging. Ok, I have a v3.0 board running spark and fuel (MSI). I'm using the Ford EDIS-6 ignition system, and I have great spark! My gauges all work on megatune, but for some reason the injectors are not opening. I'm running a relay board and have tripple checked all my connections. I am getting 12v to both pins at the injectors, but apparently, megasquirt is not grounding them for fire. I have attached my code if anyone is kind enough to look at it. I've scoured the forum, but if someone has also had a similar issue, please point me in the right direction. My VE table is borrowed from another member.Thanks. Copy of 280z July.zip

I would be interested to know how much. I have a touch screen in mine, so they would have to work around that.

Hey guys, I'm looking for a 255lph external inline fuel pump. I bought an intank pump when I was going the stock route, but now I have a sump fuel cell so that pump is worthless. I have random parts (swaybars, interior pieces, etc) if you want to trade anything. If not, shoot me a pm with a price. Thanks!

Happy Birthday

Hi, I've got a hatch from an Arizona car with absolutely no rust (no glass either). I can ship it cheap if you are interested. It's light and I have a fedex account. Shouldn't be more than 20. Let me know if you're interested in the shipping option.

Thanks! That pretty much kills the idea. I have been talking with custom cable inc; they are building a quote for what a 20 awg 6' cable would cost. I'll keep this thread updated if it's halfway affordable. I think this would be a great option. They will sell in large quantities as well, so maybe a large group buy would be in order!

I was doing more research and found that 26 gauge can hold 3 amps... Moby, would you know what kind of amperage the injectors will pull? I can image much more through traces on a pcb

I read the one forum post where a parallel cable was considered, but he never finished the thought! It says 18 ga, but All the heavy loading is through the relay board right? All power distribution...

Has anyone tried using a computer db37 cable to connect the relay board to the ecu? I found one with 26 awg wire, but I'm still not sure if this is heavy enough. I built my own, but it's not pretty and the diy cables are expensive. Any thoughts?

I've got a 76 tail assembly. Does your have the harness running through the body or across the floor?

I can etch channel numbers in clear acrylic...just offering help....geeze

I told the other guy looking for a faceplate this too, if you can use Autocad, I can laser cut a custom faceplate out of plastic. I Can put any etching, holes, shapes, or basically anything 2D into it. I just need a dxf file. Let me know

If you can draw the faceplate in autocad, I can laser cut it out of plastic for you. let me know

I have an ignition box out of a 77 that looks like brand new. I have edis-6. PM me if you want to go the replacement route.

Where did you get the rear diffusers? Did you make those?

Do you know what the stock range is?

That's a little confusing. I have the stock fuel gauge, so which wires to go what on the fuel cell?

anyone?

Thanks guys, I've got one

Knowing the tensile strength of the steel though, I doubt there will ever be a datsun situation that produces forces anywhere near yield. I think the .4 ratio will be fine for this.

I just mounted a 15 gallon aluminum RCI fuel cell in the rear of my 76 280, but I'm a little lost as to wiring the sender. It has a 90 ohm gm style with the center nut terminal and a side spade. Does anyone know which of the 3 wires from the original harness to go what? I searched but with no luck. Thanks

I'm looking for a 5spd center support out of a 77 280z. One of my illustrious friends threw it out during the pull and reubild. I fabbed my own, but would rather have a reliable piece. If anyone has one, I'd like to buy it. Thanks

Hey guys, I'm looking to pick up a wideband controller. I was wondering if anyone had an extra or was wanting to sell theirs. Thanks