Jump to content
HybridZ

zedsn

Members
 View Profile  See their activity

  • Posts

    67

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by zedsn

  1. zedsn
    I have the 180 mustache bar as well as the chrome shifter. I also have a complete 240z wiring harness from stem to stern except for the dash portion. If you still need the parts let me know. Ed from Ohio.
  2. zedsn
    I have a decent original splash pan from a 1976 280z available. May not be a direct fit though but I would think that it would be close.
  3. zedsn
    I have a pair of hitachi flat tops removed from a 260z. I only have the carbs and they are complete but should be gone over before installed as they have been sitting awhile. You can have them for $50 + shipping. If interested let me know.
  4. zedsn
    I have a complete wiring harness and engine bay harness that was removed from a 1976 280z. PM if interested.
  5. zedsn
    The passenger r200 z31 axle assembly is the shorter of the 2 by about 1 1/2". Reason I know this is I replaced my drivers side this past summer.
  6. zedsn
    I have a passenger side 1984 300zx turbo 4 bolt passenger side axle shaft with cvs and is the shorter of the 2 shafts if that is what you are looking for. If you are interested let me know.
  7. zedsn
    All I have is a pair of newish front lowering springs but no struts. If you are interested in them let me know.
  8. zedsn
    I have the early style for a 1970-71. The early ones had the spacing closer together for the clutch and brake master cylinder.
  9. zedsn
    I have a couple pair and will PM you.
  10. zedsn
    I believe that I have one side from a 240z but I think that they are the same as the 280. If you are interested let me know.
  11. zedsn
    you have a PM.
  12. zedsn
    I have the right side turbo axle with cvs for 50 plus shipping if you are interested.
  13. zedsn
    I also have a wiper linkage assembly available if you are interested.
  14. zedsn
    I only have the passenger side 300zx 4 bolt axle assembly for 50 + shipping. It is complete and boots are in good shape.
  15. zedsn
    I might have one but it has been out of the car for a couple of years and might need rebuilt but it is stored in my garage. If you are still interested let me know and i will look to see if i still have it.
  16. zedsn
    I have a oomplete turbo 4 bolt z31 passenger side axle assembly for 50 plus shipping. If you are interested let me know.
  17. zedsn
    I have a 1976 280z engine harness available.
  18. zedsn
    Hi Ada, I have a pair of 240z, 300zx, and 280z front hubs available and sent you a PM.
  19. zedsn
    I have one side of the light harness. PM if interested.
  20. zedsn
    I have a complete wiring harness with fuse box and relays from a 1975 280z available. It also has sealed beam headlight holders. If you are interested let me know.
  21. zedsn
    I have a nice manual trans flywheel and the pedal assembly. If you are interested let me know.
  22. zedsn
    I have a pair of 5 lug front hubs with bearings and races that were removed from an 86 turbo 300zx. I also have the rotors that are in good shape but they will need turned to remove the rust on the faces. Have front calipers as well if needed. If you are interested let me know.
  23. zedsn
    sent you a PM
  24. zedsn
    Hi, I have a black in color 7 slat aluminum rear hatch louver from a 240z available for $100 plus shipping. I am in Ohio. If you are interested send me a PM.
  25. zedsn
    I found the rear view mirror with bracket and you can have it for 20 plus shipping. If you are interested let me know.
×
×
  • Create New...