zedsn
-
Posts
67 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by zedsn
-
I also have a pair if you are interested.
-
I think that I have the turnsignal switch and may have the relays. I parted out a 1976 280z ahwile back. Pm if you are still looking.
-
Need some specific S-130 & Z31 parts to trade for some of mine
zedsn replied to zentech's topic in Parts Wanted
I have a 3.90 open rear diff removed from a NA Z31 for sale. It works well and is clean inside. PM if interested. -
I have one but don't know if it works for $15 shipped.
-
I may have just the arm rest if you need that.
-
I think that I have a 240z drivers side window glass. PM me if you are still looking and I will check the shed.
-
I have a rust free datsun metal battery tray itself not the rounded metal fender part. Not sure what you were looking for.
-
I have a good pair of 240z halfshafts and sent you an email.
-
I have both rear view mirror spacers. The plastic outter one and the metal inner one where the rear view mirror attaches to. I also have a black rear view mirror if yours is damaged. I don't have the 3 mounting screws though but any hardware store should have something. If you are interested let me know.
-
I have a pair if you are still looking.
-
I also have a complete ac setup from a 76. You can have it all for 200 plus shipping.
-
I have the door glass available from a 1976 280z. If interested let me know.
-
I sold my 240 wiper motor but I have the whole under cowl arm assembly. If you are interested PM me and I can ship.
-
I have a R180 mustache bar from a 240z which I believe to be the same as the 260z. It has the rubber bushing in it. If you are interested let me know.
-
I have an open z31 r200 with a 3.90 I think. Not sure you were going after a z31 or S30.
-
I may have both sides if you are still looking.
-
Hi, I have a factory 1976 280z grill that has the upper wide section as well as the thinner underneath section as well. Pm if you are interested.
-
I have a front pair of 240 along with a front pair of 280 hubs if you are still looking.
-
I think that I still have a pair of rocker panels that I removed from a 76 280z. If you are interested let me know. I also have the parts where the hinges go as well and could cut down what you need if you need them as well.
-
I have a used master cylinder that I am willing to sell and it has those fittings. If you are interested let me know.
-
I have a downpipe with good flange that I cut off down below at ground level. If you are interested email me at zedsn@hotmail.com for a photo.
-
Sent you an email
-
I have a fuel line if you are still looking.
-
I think that I have the upper and lower piece. If you are still looking send me a PM and I will try to locate it.
-
I believe that I have the transister ignition unit from a 1976 280. It was working when removed. It is still hooked up to the wiring harness and that is available as well. If you are interested let me know.