COZY Z COLE

Look at the following link...http://www.atlanticz.ca/zclub/techtips/distributor/index.html Looking at the first pic. with the module's stamping of the part number and it's position on the distr. the 2 prongs are on the top. The E12-80 unit came in the 79-81 NA 280ZX. LARRY

Clips Qty 12 to secure the (2) L/R rubber sealing strips on the front fenders when you close the hood. LARRY

You also should check your fuseable links....http://www.atlanticz.ca/zclub/techtips/fusiblelinks/index.html LARRY

Actually it's not that old. What is amusing are threads from 2002 being answered... What would really help us if the OP would respond to suggestions given to their questions. If they worked or not or what they did that fixed a problem. LARRY

Top Secret... I've edited your post and I don't want to have to do it again. I suggest you read or reread our posting rules. You've been warned... LARRY

Here's an option. Go to this link, print out the two different year's wiring diagrams and compare them...http://www.autozone.com/az/cds/en_us/0900823d/80/1d/1d/80/0900823d801d1d80/repairInfoPages.htm LARRY

From another thread, try this number and report back to us... "I've reached him no problem at (440) 735-2628. He owned Powder and Performance Coatings. Ask for Tom." LARRY

I've been running the Weiand 144 blower for five years and it requires no maintenance other than checking the oil sight window to make sure of your correct oil level in the blower. About psi.... It came with a 6 psi pulley and after talking with Holley Tech switched to a 10 psi pulley. That is the highest range they recommended on this blower. Cooling... This set-up is a heat generater. Alum. radiator, 2-speed Taurus temp controlled fan, and front air dam was used. Ignition... MSD-6-BTM to control spark and timming. Hood.... Five in. cowl to fit the damn thing in with the K&N filter. Trans... Raced prepped TH-350 with 2200 converter. Rear end...R-230 with MM's adj. control arms. Frame..... Bad Dog's frame rail supports. Fuel... Mallory Race Comp. adj. fuel reg./ electric high flow fuel pump/ return line set-up and a HOLLEY DP Supercharger carb. Other... a whole bunch of small items...... Lastly I would not go this route without access to a Dyno shop. This set-up is not to be street tuned. You seemed to indicate a budget limit on that engine set-up, boy going this route is not for the faint at heart or the person on a tight budget. LARRY

Right here!!!! http://www.atlanticz.ca/zclub/techtips/fusiblelinks/index.html LARRY

Use the OEM 280ZXT ones . The same nut supplied by Ross in his R-230 conv. kit. http://www.modern-motorsports.com/catalog/product_info.php?products_id=65&PHPSESSID=81e157ce2c8467453be25bf5b27de171 LARRY

http://www.baddogparts.com/ LARRY

The key ststement here is that HE deleted his own posts, not one of the Admins deleted it. We found out about this during a search just like some of you have... LARRY

The outcome of this thread is a classic example of where juvenile actions rule over adult based content... LARRY

Let's cut the ropes off the cars and get out of the forrest AND get back to the dyno subject of this thread. LARRY

Use the Google language feature. It's a little rough.....http://translate.google.com/translate?u=http%3A%2F%2Fwww.motorpasion.com%2F2006%2F09%2F22-1960-vespa-prostreet-custom-hot-rod-microcar&langpair=es%7Cen&hl=en&ie=UTF-8 LARRY

Welcome aboard and you are on your way to joining the other side... LARRY

Good info using this link....http://www.atlanticz.ca/zclub/techtips/EFI&fuel.htm LARRY

Short answer is no. Ross has posted threads on new products in the Vendor Forum but you still have to order those parts by using his web site. LARRY

LOL.... These three posts sound like the dialogue you would hear between Hugh Hefner and a young man discussing using Playboy to help him get his first good lay.... LARRY

Part of the written test after taking Engineering 101...... LARRY

UNDERSTANDING ENGINEERS - TAKE ONE ******************************************************** Two engineering students were walking across campus when one said, "Where did you get such a great bike?" The second engineer replied, "Well, I was walking along yesterday minding my own business when a beautiful woman rode up on this bike. She threw the bike to the ground, took off all her clothes and said, "Take what you want The second engineer nodded approvingly, "Good choice; the clothes probably wouldn't have fit." UNDERSTANDING ENGINEERS - TAKE TWO ******************************************************** To the optimist, the glass is half full. To the pessimist, the glass is half empty. To the engineer, the glass is twice as big as it needs to be. UNDERSTANDING ENGINEERS - TAKE THREE ******************************************************** A pastor, a doctor and an engineer were waiting one morning for a particularly slow group of golfers. The engineer fumed, "What's with these guys? We must have been waiting for 15 minutes!" The doctor chimed in, "I don't know, but I've never seen such ineptitude!" The pastor said, "Hey, here comes the greens keeper. Let's have a word with him." "Hi George! Say, what's with that group ahead of us? They're rather slow, aren't they?" The greens keeper replied, "Oh, yes, that's a group of blind fire-fighters. They lost their sight saving our clubhouse from a fire last year so we always let them play for free anytime." The group was silent for a moment then the pastor said, "That's so sad. I think I will say a special prayer for them tonight." The doctor said, "Good idea. And I'm going to contact my ophthalmologist buddy and see if there's anything he can do for them." The engineer said, "Why can't these guys play at night?" UNDERSTANDING ENGINEERS - TAKE FOUR ******************************************************** What is the difference between Mechanical Engineers and Civil Engineers? Mechanical Engineers build weapons and Civil Engineers build targets. UNDERSTANDING ENGINEERS - TAKE SIX ******************************************************** Three engineering students were gathered together discussing the possible designers of the human body. One said, "It was a mechanical engineer." Just look at all the joints." Another said, "No, it was an electrical engineer. The nervous system has many thousands of electrical connections. The last one said, "Actually it must have been a civil engineer. Who else would run a toxic waste pipeline through a recreational area?" UNDERSTANDING ENGINEERS - TAKE SEVEN ******************************************************** Normal people believe that if it ain't broke, don't fix it. Engineers believe that if it ain't broke, it doesn't have enough features yet. UNDERSTANDING ENGINEERS - TAKE EIGHT ******************************************************** An architect, an artist and an engineer were discussing whether it was better to spend time with the wife or a mistress. The architect said he enjoyed time with his wife, building a solid foundation for an enduring relationship. The artist said he enjoyed time with his mistress, because of the passion and mystery he found there. The engineer said, "I like both." " Both?" Engineer: "Yeah. If you have a wife and a mistress, they will each assume you are spending time with the other woman, and you can go to the lab and get some work done." UNDERSTANDING ENGINEERS - TAKE NINE ******************************************************** An engineer was crossing a road one-day when a frog called out to him and said, "If you kiss me, I'll turn into a beautiful princess." He bent over, picked up the frog and put it in his pocket. The frog spoke up again and said, "If you kiss me and turn me back into a beautiful princess, I will stay with you for one week." The engineer took the frog out of his pocket, smiled at it and returned it to the pocket. The frog then cried out, "If you kiss me and turn me back into a princess, I'll stay with you and do ANYTHING you want." Again the engineer took the frog out, smiled at it and put it back into his pocket. Finally, the frog asked, "What is the matter? I've told you I'm a beautiful princess and that I'll stay with you for a week and do anything you want. Why won't you kiss me?" The engineer said, "Look, I'm an engineer. I don't have time for a girlfriend, but a talking frog, now that's cool." LARRY

A post was deleted that was written by a new member who is now banned. We all can return now to the thread's subject matter.... LARRY

That stooge is history.... LARRY

There's good reasons you won't find much info on stroking a L26. Read this link for a start of the reasons...http://www.classiczcars.com/forums/showthread.php?t=27414 LARRY

I fixed your second pic so it would show and on the project.... LARRY