Jump to content
HybridZ

destruck

Members
  • Posts

    35
  • Joined

  • Last visited

About destruck

  • Birthday 07/31/1987

Profile Information

  • Gender
    Male
  • Location
    San Diego, SoCal

destruck's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. There's a guy that makes custom bellhousings for the 4g63; http://www.billsautofab.com/recent_mit.asp I wish someone made mounts, I am in the process of doing this swap but have no welder =/
  2. Just see'ing if anyone is familiar with the z31 ECU. I have one installed on my L28ET (its a late model 16 bit version) swap, the wiring has been gone through and now its at a point where the car was running fine but as went for a test drive and it fried the ecu to the point where it would not start. The car ran off another z31 ecu but its an older model 8 bit one. Now, I am wondering if anyone can point me in the direction of what fried on the ecu and if it was just the ecu or is it wiring. I am trying to get a ecu tuner to look into it but the local guy is very backed up at the moment. Any help is appreciated.
  3. Looking to get a 11mm rail made, with feeds on both ends and a return in the center. Is this possible? Thanks
  4. Haha ain't that the truth with tax returns... I actually never ran the motor sat in my garage for a long time til I bought another 240z with a l28et swap in it already and sold that motor off lol. How does that core fit the s30? I wanted to buy something similar to that for mine it should handle cooling for the small amount of power pretty easily.
  5. Yup I bought your motor way back when. Was just checking to see if you were since I'm in the market for suspension soon, but it's all good. Can't wait to see the progress this car gets.
  6. Another one huh? And another bad ass motor swap! And I just saw you going to be selling the suspension setup. What's it consist of and what will you be looking to get out of it? *(If your sig is updated)*
  7. I'm interested in knowing this as well. A/C is always nice to have.
  8. Loving the fab work. Eager to watch the progress on your car.
  9. No luck yet. I took everything apart to delete all the extra smog / emission stuff to see if it helped. I am getting ready to make block off plates and put it all back together soon, I just let it sit since I picked up another toy in January lol. If this does not work, I will probably accept defeat and go sbc 350 carb.
  10. I've gone through everything in the FSM with no luck. I've got to go through it again because something is clearly wrong.
  11. Well, just a quick update. The VCM was eliminated and the issue still persists. I unhooked the wastegate and it seems to still do the issue without any boost building as well. I did get a chance to spray some DeoxIT contact cleaner on all the plugs, and let me tell you, it made the car run so perfect. Idle is perfect, motor sounds so smooth now. However, my stumble / back fire is still there around 2k rpm's. I am going to try a known good set of injectors and next up is to check the whole harness from end to end.
  12. If I do go ahead and delete the VCM, I will run a vacuum source to the AAC but can I do the same for the EGR or is it best to delete this as well? It's raining here so I haven't had a chance to check the timing again but I still need to take a look and see what is up with it. I may have been rushing last time and just missed it. CAS and wheel I will check, I found a crack on the distributor cap but it does not touch any of the contact points so I don't know if it effects anything or not.
  13. Can the VCM go bad / fail? My vacuum use to be around 10 before I did the timing, but when I did the timing I found a hose that wasn't plugged in as well as the VCM wiring one of the two connectors was unplugged so I plugged it back in. I guess I could delete all this and see if ti helps? At this point I can't even find the timing on the pulley anymore at idle, I'm not sure if thats because it is running so bad or something is off, but I will look into that some more. Timing has been corrected at the chain a friend and I put it back to TDC and where it should be with new timing components. Ignitor is as far as I know a L28ET stock one, and the coil I just replaced with a stock 280zx turbo unit as well because the old one tested bad. My next step was to actually dizzy and the cas sensor in the process because we thought that might be an issue as well but I will test it now that I know. I could not find a method of testing it before. Also planning to get some DeoxIT contact cleaner spray as it seems to work great by many members on here to clean up the connectors. All this is really helping me hopefully I can figure this out and get her back on the road soon. Thanks guys.
  14. It's pretty much a weekend / fun car so 2 months of driving wasn't much at all. It seemed to get worse very quick. When I bought the car it was in bad shape, and with a little work it seemed to run good. I do not know the history of the car at all, it very well could be a Frankenstein setup. It is marked as a F54 / P90 that's all I know for sure. It is as far as I can tell a 82-83 motor and was running a 81.5 turbo ecu and AFM. With the leak down it was verified only to be leaking out the rings, I actually was for sure it would be the head gasket but no bubbles in the coolant, and no leaks out the exhaust or intake. The numbers shown in the leak down test are what really got me and that's what I wanted to know if these two problems are related. At this point I have very well considered a swap since I have to pull the motor.
×
×
  • Create New...