Jolane

I used a carter into a surge tank too...worked great! Low noise, reliable, fairly inexpensive. My neighbor has a Holley (Blue or Red, not sure)...it's much louder and he's had issues with it leaking.

Thank you Dan!!! That drop down on the bottom is what I didn't notice! Joshua

I posted several items for sale in the appropriate places, but forgot to have the email notification option selected. I am subscribed to each thread. Can I now enable email notification for each thread that has already posted? If so, how? Thanks! Joshua

Oh, there they are! Thank you very much Jay.

I also want to echo the thank you. I now know how to remove and install the parts, and make the correct measurements. The last piece of information that I have not seen is torque specs. Does anyone have the torque specs for: 1. Bearing caps 2. 12 mm ring gear bolts Additionally, I assume I should use some sort of Loctite on at least the ring gear bolts. Is this correct? What kind? Again, thank you for all the help! Joshua

Well, I can tell you this (and I don't mean anything personal by it). The Unemployment Insurance here in New Mexico, USA, is just as bad if not worse. When I was laid off a few years ago, I received a MAXIMUM of $276/week, minus taxes. There is also a waiting period here, and the application process is nearly useless (horrible website that is down most of the time). That is not even close to 55% of a small salary. It is a complete crock of crap! My GF was forced (coersced) to resign from her job in Nov, a few days before her 1 year probationary period was up. This was a state job, at a state run hospital. She never had a negative comment from any co-workers or her boss, great reviews, etc. Well, she was told that she would be fired (not laid off mind you) if she did not resign, and that it would go into her file and look bad for future employers. So she hand wrote a resignation letter on the spot, definitely not something would have done normally. Guess what, she was now NOT eligible and has not been able to collect UI. She has two kids (previous relationship) to take care of, plus all the normal bills. Absolutely rediculous! The system really is worthless! The honest person needing assistance between jobs gets completely screwed, even if they are doing everything they can to work. I feel for you! Good luck, and hang in there, you will be done with school in no time, and it will be worth it. Joshua

I did the front and rear studs on my 280ZX once. Yes, it was a lot of work. I found that having several different lengths of 3/8" extensions along with at least one universal joint allows you to get several of the bolts under the intake. Then, you will need a 12 point wrench to get at the rear one (IIRC). I can also highly recommend that you get a wobble drive extension, and both short and long sockets. It is not trivial, but very doable. I was 'unlucky' enough to break a TAP off in the hole. I thought I had drilled the bold bolt out completely, but I hadn't, and a piece of the steel inside caught and broke my tap off. That was misery, but I was able to pound on the tap and break it into pieces, and remove the piece. It took several days of work. As a replacement, I used the next larger stud size, since the hole was buggered. A keensert would have been better. Good luck on your project, I feel for you! Joshua

That was very well done...except that the piston-rod assembly was in the wrong order... I would have thought the pistons should have been put on the rod first, then the crank into the block, then the pistons drop in. The 4-cycle running animation was very well done! A lot better than most of the weekend car shows, and those guys get paid to do it... Joshua

Thanks for a detailed reply Blue. Just to make sure I understand, you threaded the stock pin to 5/8" thread (corse probably), then used a nut to tighten everything down. It looks like you also put the stock nuts on perhaps as a jam nut? Again, those looks great. Thank you, Joshua

Terry, I like the way you modified the LCA's. Looks like a nice clean setup with a lot of adjustability. Did you mount the heim's with spacers between them and the strut? Are you using bolts throught the heims, or the stock pin? Thanks, Joshua

I agree with Michael and Blairjj. I too have a MSME, and it was very worthwhile. A BS degree in any technical field is very common today. Don't get me wrong, it is a lot of work to get, but it is also too general. Consider you can be designing HVAC systems for large building or Aerospace parts all with the same degree. A Master's should help narrow down your field of expertise...so you can focus on the fun stuf and learn a lot more about it. Personally, I found grad school MUCH more fun that undergrad for that reason, not to mention that other grad students are normally more serious about school than the typical undergrad crowd. I would like to go back and get a TECHNICAL MBA in the future. The program I would like to go through is in another state though, and they require you are practicing in your field for 5+ years before attending. I too thought about a tech school (if for no other reason than it seems fun). In the end I figured that I could learn the information other ways and buy a lot of the equipment I would need with the money I would have spent on tuition. I like it this way... Hopefully this helps, Joshua

Jon, Thanks for the travel. I guess this has been the long way on how to learn about the specific Z application. I guess if the stock length shock does not bottom out internally, then you might as well run that. If it does bottom out, the best option is to section the strut tube and run a shorter shock. Seems pretty straight forward now. Thanks for a good (at least for me) discussion... Joshua

Careless, Tanks for the diagram. I had this pictured in my head. The part missing from your picture though is the piston location inside the shock body. I guess the point I was trying to get at was that I don't think it is universally better to space the shock off the bottom of the strut. At some point the shock is too short in compression travel anyways, and the piston will run into the bottom of it. This stuff is important when building 4X4's as well. In that application, the rebound travel (droop) is usually less than compression by a good bit. Trying to cram the longest travel shock in there is important, but get too long a shock and the benefit is negated since the piston will bottom out instead. There is a balance to this. The longest travel shock is not always the best universally. In the end I think the best thing to do is section the strut tube and run a shorter shock. Joshua

Terry, Exactly! The outers are also overcoming the twisting force of the strut, but with a shorter moment arm (both causing and reactionary). This is why I was curious if there was already an analysis of this out there. Joshua