[RB26 head oil drain solution]

cam cover fittings and head fitting still available?

[rwd trans]

Only the R33 RB25det's have the bigger 2wd box.

 

Rob

 

thats what i was thinking too. is there an easy way to tell the difference without having them side by side?

[R.I.P.S end of year video 2009]

good thing your down under cause obama might try to limit your max horsepower

[rwd trans]

guy its been awhile since i have researched this but isnt there a difference in the r32 rwd trans and the r33 rwd trans. wasnt the r33 beefier?

[#11110-20P00 rb20 oil pan discontinued!]

Yeah how much is the pan now. I have not checked lately.

 

same question

[TC rod pivot relocation / Bad Dog subframe connectors / Slotted Crossmember]

Hey, i am trying to finish up my front tube chassis. Currently i am at the TC buckets. my setup is almost exactly like yours. i have 2.5inch frame horns and have done what 74 5.0 and mortenson have done with the buckets, 2x4 tube and have slotted them as much as possible without the rod end hitting the tube itself. My question i guess is it seems that even with the tc rod mount in its lowest position it still will be slightly higher than the inner lower control rod bolt. Auto X probably isnt in this cars future but will this have a big affect or should i take a peace of 3/8 plate and weld that to the top of the box which would lower the tc bucket some.

[240Z Chassis Dimmensions]

where did the 280z dims go (different crossmember so different measurements in some places)

[New CV Joint, Diff conversion, brake swap in the Works!]

up

[My RB260zdett-ultimate-street-car-build]

xmember pics!!!

[Unnatural Aspiration part 3]

i can imagine

[Unnatural Aspiration part 3]

how much is something like that running you?

[POR 15 question]

make sure you wash it off with water after marine clean and after metal ready (etching). it will flash rust though i sandblasted my car and it turned out good so far. i beat it with a hammer and it didnt come off ( schedule 40 front tube chassis)

[enclosing front tube chassis]

looks good

[enclosing front tube chassis]

pics?

[My RB260zdett-ultimate-street-car-build]

lol you rookie, u got the 12.2inch brakes...pshhh i got 13" yea thats right...

[enclosing front tube chassis]

Black plastic. It comes in 24" wide rolls. I got mine from Coleman Racing.

 

 

seems like you need a picture assistant

 

http://www.colemanracing.com/catalog/product_info.php?products_id=3451

[enclosing front tube chassis]

oh i mean what are you guys for inner fenders? if that makes more sense

[enclosing front tube chassis]

yea i dont think i have that kind of fab time to devote, great job though 74

[enclosing front tube chassis]

74_5.0L your front end encloses your entire car... geez man thats sweet

[enclosing front tube chassis]

zeus fasteners holding custom bent sheet metal panels will probably be your best bet.

 

dzus fasteners

 

hmm...

[gas cap behind license plate]

yea i saw that, he has done a good job with it.

[gas cap behind license plate]

ohhh found one by happenstance any more??

[gas cap behind license plate]

hey guys has anyone moved their fill neck to behind the license plate. i might end up putting a fuel cell so it might not be a big deal, but if i leave in the stocker i would like to see your mods. want to shave that ugly door off.

[enclosing front tube chassis]

yea was thinking about making them removable by welding triangles mounting tabs in the corners and drilling a mounting hole in those... but then i dont want it to rattle either...

my frame looks alot like this.. this is 74_5.0l_z car

 

[enclosing front tube chassis]

Hey guys, im at the point where i need to start putting up sheet metal on my front engine compartment that i made out of tubing ( totally cut off the front of the stock car). i was just going to start doing it out of sheet metal but im curious of what you guys are doing if anything different.