ZT-R
-
Posts
1734 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Posts posted by ZT-R
-
-
how is she comming along derek? i did go look at my 280z and it does had a plastic panel
would this be difficult to ad another gauge to it? maybe offer a 2 and 3 gauge pod?
-
you dont have ac do ya? i would assume not
-
has anyone used those Jim Wolfe resistors posted eariler? i have some on the way. just curious... rb26dett
-
the correct mass air flow for a r33 rb26dett is a J70 correct? P/N 22680-05U00
-
hey guys i was surfing and found this intercooler from PWR. i was curious to see if anyone was running it. i dont see any specs on it though.. (granted not like its hard to make one for us)
on a different note, back in the day i had a picture of a Z that a guy was making a custom intercooler for his Z, this thing was freaking huge, but i cant seem to find the picture. i want to say it was a yellow car (not the one with the 2jz though)... anyway if you have pics of it please post
-
Looking for
Z32 Twin Turbo
rear calipers
Hubs
Parking Brake setup ( is this the same on non turbo and twin???)
Right CV axle
Left CV axle
-
anyone have on mounted on their 26
-
what ya offering? i know a good shipper... pppffft
-
i'll get that ***** running.... just ordered prc radiator with 20an outlets, oil cooler, ac condensor, water pump, tensioner, idler pulley, thermostat, ATI damper,cam gears, and some wiring harnesses so i can have plugs on my wiring. hopefully i can figure out this mount deal. i plan on taking some measurments on the xmember, maybe its tweaked. down the road i intend to put this R230 to use.
-
Nice job stony, posting so i can find this later
-
ok, nevermind that pm from earlier
-
would -16AN work for upper and lower? or should i do -16an on top and -20 on bottom?
-16 hose has an I.D. of 1"
-20 hose has an I.D. of 1 1/4"
or should i go -20an on both?
-
hell i can get a single 16 that will flow 2780 cfm... thats more that two 10"s can pull.... but i cant wire one to the ac system though
maybe i can wire it into the high pressure switch anyway, then it will kick on if the head temp creeps up and it wasnt on due to the water temp being low, hmmmmm -
-
yea, thats what i was thinking.
as for radiator cap for this prc... i would assume that we will be using the 22-24psi version?
also it has been so long since i have had my 280z condensor out, i cant remember. i have a 240z and a 280z, rb26 in the 240z and i want to put ac in the 240... do i want a double pass condensor or a side to side. my guess is one that runs side to side. as one hose goes from the ac compressor to the condensor, then from the condensor to the evap which would be on the pass side...
-
you guys guys making your own fan shrouds? i am thinking about ordering a condensor with my prc. if i have a 4" intercooler, a condensor and a radiator do you think i need 1 fan or 2?
-
here is an updated link
i dont see any coolant passages though. is that only for the 25?
anyone else using this yet?
-
lets see those shrouds.... i assume you guys are just running 1 fan? i am thinking of going with a High Output 12" from spal as i might ad AC later.
-
subscribed
-
anyone have pin out for R33 RB26?
-
hope he is busy working on it...
-
updates
mine hasnt been touched yet. i need some 17" wheels to clear the azc steer adapters w/bumpstop thingy -
yea i have lost interest in my tube chassis front, but at least she is on the ground. probably be on the ground at the dump if this economy keeps up... or should i say down.
-
sandblast that spot
maybe i can wire it into the high pressure switch anyway, then it will kick on if the head temp creeps up and it wasnt on due to the water temp being low, hmmmmm
Unnatural Aspiration part 3
in Nissan RB Forum
Posted
if you like it..... leave it. quit trying to be someone your not...ahahah