Search the Community
Showing results for tags 'Body work'.
Found 3 results
-
Hey guys, I recently bought a 240z and it ended up having more rust than I originally thought, thus begins my new winter project. Pulling her home with my 1987 2WD Toyota Pickup. That was a long haul between northeast of Sacramento and Southern California. The truck performed well though! The car sat for a while and the engine internals have rusted. The overview plan is to pull the engine, fix the front half of the car's rust problems, swap the SUs from the L24 to my rebuilt L28, install the engine, and drive it while fixing other things (interior). Some hood damage. Hopefully I can bump these out. Starting to inspect for rust on the passenger side frame rail/firewall interface. It's definitely in need of some work. Inside engine bay rail. Engine removal In preparation for cutting into frame rails I dropped the front suspension to remove as much stressed from the rails as possible. Stand I welded up to support car from the transmission mounts. I've made a little more progress -- started making patch panel templates and cutting metal from the battery tray area. It looks like I'm going to be replacing a lot of metal around the battery tray area -- frame rail, battery tray inner fender, a piece of the firewall, and passenger side floor pan. Hopefully driver side isn't this bad.
-
I have been working on resurrecting my '72 240z w/ l28et conversion. In the past two years the car has come a long way. Due to lack of time and/or lack of expertise I am hoping someone can point me in the right direction on the following items remaining on my restoration to-do list: 1. Installation of interior control panel 2. Install of radio and speakers 3. Install of sound deadening 4. Fender roll or install of fender flares 5. Troubleshoot ignition/fuel issue (fairly certain it's a bad TPS) I'm in north/central jersey. If anyone has a trustworthy and reasonably priced mechanic that can do the work, please let me know.
-
From the album: Energy_z
It's been a couple days of scraping, but I'm finally close to being done with scraping off the undercoat underneath the car
