Search the Community
Showing results for tags 'sbf'.
Found 4 results
-
Hey guys, been a loooong time since I was last on here. I am getting back into my engine swap project for my 77 280z. I sold the engine out of the z this year and picked up pieces for the swap. I am shooting for the following setup 302 EFI, W/C T5, unsure about rear differential I have a W/C T5 already but it has no bellhousing, supposedly low miles I have an 86 mustang GT 302 but I just obtained a free, running and driving 2001 Mercury Mountaineer with a 302 that I am told is the best factory 302 I can get, so I will likely be using that for the donor I do not have a rear differential for the swap, that seems to be the only other BIG item that I am missing. I have the solidwork prints from the Laine swap website and will likely be using those to fabricate my mounts. I will be updating with pictures soon. Is there anything else I will need for the swap that I cannot pull from the Mountaineer? I was hoping I could use it's ECU and electrical system in the Z. I would like to be producing over 200hp/325ft/lbs at the wheels with this setup. I was told that the cam in a mountaineer 302 is actually a truck cam and I could gain a decent HP boost (at the cost of a little torque) by swapping the cam out of my mustang GT 302. Does anyone have any experience with this?
-
Quick Reference Sheet of Ford Z Build ups, PM me to add more to the list, or to update erroneous info. Ford Modular Motor Swaps (4.6L, 5.4L): 1978 280z + SOHC/DOHC 4.6 (yellowoctupus on HybridZ) http://forums.hybridz.org/topic/97812-460zgt-project-build/ DOHC 240z on Ratsun (abandoned?) http://community.ratsun.net/topic/54796-1974-260z-46dohc/ DOHC Lincoln 4.6 + 240z 'Vert (PnyPwr on HybridZ ) http://forums.hybridz.org/topic/47019-anyone-else-doing-a-46-4v-into-a-240/ 4.6 SOHC 280zx (RichRacing on HybridZ) http://forums.hybridz.org/topic/96496-project-460zx/ 2001 Cobra + 280z (abandoned?)(4.6 Cobra Z on HybridZ) http://forums.hybridz.org/topic/121534-46-dohc-280z/ 4.6 Mark VIII / Cobra + 76 280z (Mitchnandy on HybridZ) http://forums.hybridz.org/user/2167-mitchnandy Mark VIII DOHC +240z Swap (Northeredave on HybridZ) http://forums.hybridz.org/topic/100949-46l-ford-dohc-modular-motor-in-my-240z/ Greg's 240z + 2001 Cobra DOHC (abandoned?)(gls355 on HybridZ) http://forums.hybridz.org/topic/113828-46-dohc-svt-in-a-240z-here-we-go/ Ford Windsor Engines (289, 302, 351w, etc) Brian Laine's well documented 302 Conversion http://www.lainefamily.com/240Z_V8_Conversion.htm Terry Oxandale's 5.0 (No pictures, lots of info) (BlueovalZ on HybridZ) http://www.zhome.com/rnt/FordPower/index.html Terry Oxandale's Pictures http://www.fototime.com/ftweb/bin/ft.dll/pictures?userid={7DC317B0-8EDB-4B2E-A837-F708D07C9769}&inv=9C67398D46D99D9&userid={7DC317B0-8EDB-4B2E-A837-F708D07C9769}&inv=9C67398D46D99D9 Pete Papriska's 5.0 Writeup (pparaska on HybridZ) http://alteredz.com/ Dan's 74 5.0 Swap (74_5.0L_Z on HybridZ) http://forums.hybridz.org/user/30-74-50l-z/ 351w Fits (gene_w on HybridZ) http://forums.hybridz.org/topic/32159-alsils-mounts-with-a-351w/ Kris' 302 Swap http://datsun.getyours.com/default.htm Old 5.0 Swap, dead links, lots of info still.. (JoshB 240z on HybridZ) http://forums.hybridz.org/topic/20535-50l-install-with-pics/ Mark's 260z in Japan (74.5 347z on HybridZ) http://forums.hybridz.org/user/266-745-347z/ Mark's Motor Mount Design (74.5 347z on HybridZ) http://forums.hybridz.org/uploads/1336572473/gallery_266_1021_62705.jpg Greg Wheeler's 5.0 240z (gwheeler on HybridZ) http://forums.hybridz.org/topic/71855-fs-1972-240z-with-ford-v8-in-portland-or/?do=findComment&comment=682087 Greg's 500z photobucket pictures (gwheeler on HybridZ) http://s237.photobucket.com/user/g_wheeler2001/library/Project%20500Z?sort=3&page=1 Steve Todkill's photobucket pics (unfinished?) (s3079893 on HybridZ) http://photobucket.com/albums/d34/s3079893/?sc=1 Mike '77 + 302 (dead link??)(Rival5 on HybridZ) http://206.169.90.30/mike/view_album.php?set_albumName=Z-Project Al Silveria's notes (Alsil on HybridZ) http://forums.hybridz.org/topic/10559-so-all-i-gotta-do-is-fab-some-50-motor-mounts/?p=76947 Ali's 5.0 '77 (MY77Z on HybridZ) http://forums.hybridz.org/topic/51750-500z-progress-photos/ '70 240 + 302 (er34gtt2000jp on HybridZ) http://forums.hybridz.org/topic/53314-had-to-post-our-sbf-project/ SBF Swap (stangracr on HybridZ) http://forums.hybridz.org/topic/61369-new-pictures-sbf/ SBF Swap 2 (stangracr on HybridZ) http://forums.hybridz.org/topic/62818-new-pictures/ Nick's 240 + 5.0 Cobra (TheNick on HybridZ) http://forums.hybridz.org/topic/63662-new-project-240z-cobra/ Dart Block in a 240z (lilredz on HybridZ) http://forums.hybridz.org/topic/62941-shes-runnintoo-bad-its-raining-for-2-weeks/ '77 + 302 (Capt_Zorro on HybridZ) http://forums.hybridz.org/topic/29043-photos-of-my-77-z/ '78 + FI 5.0 *Sold* (JustChou on HybridZ) http://forums.hybridz.org/topic/85022-78-280z-with-injected-ford-302-50-swap-norcal/ 75 302 +73 240z - Engine Mount info... (ukcats07 on HybridZ) http://forums.hybridz.org/topic/91886-redesigned-my-cradlemount-setup-pics/ 302 Swap (Shemyazaz on HybridZ) http://forums.hybridz.org/topic/108307-280z-302/ 76 +302 (NateDaGreat on HybridZ) http://forums.hybridz.org/topic/112712-302-v8/?p=1057290 302 + 71 240z (ottoauto on HybridZ) http://forums.hybridz.org/topic/90729-just-picked-up-my-first-v8-240z/ 240z + 68 302 (akaryrye on HybridZ) http://forums.hybridz.org/topic/90018-just-bought-a-240z-w-a-ford-engine/ 260z + 5.0 FI (V8INtheZ on HybridZ) http://forums.hybridz.org/topic/72463-started-my-2nd-v8-s30project-mongoose/?do=findComment&comment=688497 302 + 240z (josephg on HybridZ) http://forums.hybridz.org/topic/88770-thinking-back-about-my-flywheel-install/?do=findComment&comment=843110 260z + 89 5.0 Megasquirt (Zhunter on HybridZ) http://forums.hybridz.org/topic/121944-50-260z-startup/ 351w + 260z (Ga. Piddler on HybridZ) http://forums.hybridz.org/topic/48582-351z/ 86 280zx + 351w (86350zx on HybridZ) http://forums.hybridz.org/topic/120301-my-z8-build-lots-of-pics/ 240z + 87 5.0 FI (timothyblythe240z on HybridZ) http://forums.hybridz.org/topic/121510-347-z/ '77 280z + 5.0 (Bubbadog127 on HybridZ) http://forums.hybridz.org/topic/114763-50-cobra-280z/ Scott Holcombe's 5.0 75 280z (PalmettoZ on HybridZ) http://forums.hybridz.org/topic/98769-brian-lanes-302-kit/ The following are Missing Build Post Links, please email me if you have info, pictures, links etc... 387 Clevor No build post yet? ((LMoore56 on HybridZ)) 2.3L + ?? Build Post Missing ?? ((V8INtheZ on HybridZ)) Mike Gibson ((SCCA on HybridZ)) Missing Build Post Link...((The Woj on HybridZ)) Missing Build Post Link...((Hitman47 on HybridZ)) Missing Build Post Link...((Beau M on HybridZ)) Missing Build Post Link...((Roamer on HybridZ)) Missing Build Post Link...((WHP on HybridZ)) Missing Build Post Link...((Ferd/289 on HybridZ)) Missing Build Post Link...((Just Jim on HybridZ)) Missing Build Post Link...((Sven on HybridZ)) Missing Build Post Link...((ecp48 on HybridZ)) Missing Build Post Link...((rudypoochris on HybridZ)) Missing Build Post Link...'72 240Z 302/C4 ((Just Jim on HybridZ))
-
Will the Laine Family sbf write-up work for a 351W?
amuscato77 posted a topic in Ford V8Z Tech Board
This has probably been touched upon in another post but I have been searching for hours and can't find anything. I just picked up a donor fox body with a 5.8L 351W in it mated to a WC T5. I originally wanted to do just a 5.0 out of a fox but the price was too good to pass up on this car. Has anyone used the Laine Family Write up to do this swap? Does the engine cradle work for it as well as the mounting positions? :bang head: Sorry if this is asking a lot my fabrication skill and tool selection is not exactly what I would like it to be for this project so any help would be greatly appreciated I imagine the driveshaft length should be about the same correct me if I'm wrong but yeah even if you guys just link a thread that has the info I'm just a helpless newbie so I'd be very greatful P.S. I plan on boosting this 351w eventually just to change it up a bit even more for the sbf Z-world -
So, I bought a really rough non-turbo ZX for $1500 yesterday with the goal of putting my Explorers 302 in it. Both are running vehicles, but both need some love. The ZX is rust free but it's in pretty poor condition mechanically... The Explorer has been in my family since '98 or '99, and has 181,000 miles on it. Its all there, but I'm tired of it. I figure if I start with two running vehicles, I should have ALMOST everything I need. What I can't buy, I'll build.
