ihiryu Posted April 3, 2013 Share Posted April 3, 2013 I've been having issues with my Carl H ecu. Guy keeps giving me the run around, and the amount I've spent on his tune and buying new ecus I could have went Nistune from the start. I'm fed up with it, and just want my car to run right. So who is running nistune? Quote Link to comment Share on other sites More sharing options...
Bernardd Posted April 3, 2013 Share Posted April 3, 2013 I've tuned a couple of RB20's with nistune. Works very well. Quote Link to comment Share on other sites More sharing options...
Wedge Posted April 3, 2013 Share Posted April 3, 2013 I am not running nistune as of right now but i have one on the part shelve . I keep hearing it is a great ecu to tune and the program is excellent. Quote Link to comment Share on other sites More sharing options...
ihiryu Posted April 3, 2013 Author Share Posted April 3, 2013 Sounds good, I just need to find someone who isn't over three hours away to get my car tuned then Quote Link to comment Share on other sites More sharing options...
Careless Posted April 10, 2013 Share Posted April 10, 2013 nistune works great. Quote Link to comment Share on other sites More sharing options...
EZpickenZ Posted April 11, 2013 Share Posted April 11, 2013 I'm curious. How much power will the Nistune allow and how soon would the MAF meters have to be swapped out for the Z32 MAF? I've also been thinking about getting Nistune for my RB26. Quote Link to comment Share on other sites More sharing options...
ihiryu Posted April 11, 2013 Author Share Posted April 11, 2013 From my understanding the z32 is good up to 500 HP. Quote Link to comment Share on other sites More sharing options...
mtnickel Posted June 3, 2014 Share Posted June 3, 2014 Bringing this back from the dead. Anyone out there running nistune on their RB20, 25 or 26? In case it's not common knowledge, you can't add a nistune board to the RB25det, but you can use an rb20 ecu (without VCT), or modify a z32 slightly to run it with VCT. I just finished the mod and it was pretty straightforward. One added bonus as well is you can use the coolant fan output to trigger your fan. Seems like most go for AEM Standalone or other high dollar systems, but just thought I'd touch base here to see what people are doing. Could also have our Bin's posted up. I'll be sure to through mine up once my tune is done. Will be RB25det, 444cc GTR inj, Z32 maf, td05h 18g turbo. aiming for 300-340whp. hopefully the stock clutch holds out Quote Link to comment Share on other sites More sharing options...
R3VO 3VOM Posted June 4, 2014 Share Posted June 4, 2014 I think I'm having the same issue with my Carl H ECU. It runs the mods I have alright I guess but the AFR's are too lean (around mid 15-16). So I'll probably be going NISTUNE at some point. I basically have the same mods as mtnickel but on a RB20 and Holset HY. Just need to find a tuner close to me or a tune to put on it from someone that has the same mods. So I'm interested as well. Quote Link to comment Share on other sites More sharing options...
Wedge Posted June 17, 2014 Share Posted June 17, 2014 I found mine on GTRC forum in the forsale adds, paid 250$ for it RB26 ill be running twin RB25 mafs good for more HP then i plan on having and It can even tune on ford lightning MAF'S wich to me sounds like almost 1000hp potential lol those are HUGE ! 90mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.