ThatOneZ Posted June 4, 2017 Share Posted June 4, 2017 (edited) This is a rerelease of RTz's coil bracket under his permission. Since he is not producing them anymore and zccjdm is gone I would like to bring these back to the community. Please read this post in its entirety before ordering. If there is anything unclear, please ask. . . . . . . . . . . Block mounting points... Made from 3/16" 6061 Aluminum. Mount Price: $99 shipped anywhere in the US. If outside the US, PM for pricing. 1. Price does not include coils. 2. Mount will require rerouting heater hose. 3. The mounts come with a light DA sanded finish as shown in photo 2. They are ready for paint, or polishes with minimal effort. 4. Included hardware... stand-offs and S.S. bolts for mounting to the block. All extra hardware not included. 5. Coil Part Number: 12558693, or 2000 Chev. Suburban 5.3L 6. Connector Part Number: 12582189 (connectors only come in batches of 4, as a sub-harness) 7. Coils known to work with Wolf3D, Haltech, Motec, J&S, and Megasquirt. It's up to you to know if and how they will work with your specific EMS. Coil Schematic... Pin A... can be grounded to the block, but my recommendation is the head. Pin B... needs to be grounded at the same location as the ECU. Pin C... to ignition channel. Pin D... provide a good 12 volt power source (with key 'on'). Begin with 3.5ms dwell. Test and tune for best ignition performance. For ordering send a PM or post here. Thank you everyone. Edited June 4, 2017 by ThatOneZ Quote Link to comment Share on other sites More sharing options...
1vicissitude Posted August 16, 2017 Share Posted August 16, 2017 Very nice! What plug wires are you recommending we use? BTW I can't see a single one of your pictures. I just remember the brackets from zccjdm. Quote Link to comment Share on other sites More sharing options...
munters Posted August 18, 2017 Share Posted August 18, 2017 Yup no pictures... Quote Link to comment Share on other sites More sharing options...
cockerstar Posted August 19, 2017 Share Posted August 19, 2017 Photobucket hosting is restricted all over now, so you're going to see a lot of broken pics. Right click on them and open in a new tab to view on the photobucket site. Quote Link to comment Share on other sites More sharing options...
munters Posted August 19, 2017 Share Posted August 19, 2017 With a right click on them there is no menu and it opens a popup to save it. A right click on the ppopup you can save or sourcecode, but no open in new tab. this makes this photobucket links so useless. Quote Link to comment Share on other sites More sharing options...
munters Posted August 19, 2017 Share Posted August 19, 2017 (edited) Double Post Edited August 23, 2017 by munters Quote Link to comment Share on other sites More sharing options...
Namor Posted August 24, 2017 Share Posted August 24, 2017 Would you sell just the standoffs and hardware? I bought a bracket from ZCCJDM a while back, but didn't come with any of the hardware and I'd rather get it as a kit than source it myself. Quote Link to comment Share on other sites More sharing options...
1vicissitude Posted September 2, 2017 Share Posted September 2, 2017 I sent you a PM last week? This still a thing? Quote Link to comment Share on other sites More sharing options...
Chickenman Posted June 11, 2018 Share Posted June 11, 2018 Are these available to fit the D585 Yukon Truck coils? Quote Link to comment Share on other sites More sharing options...
Ben's Z Posted July 17, 2018 Share Posted July 17, 2018 Do you plan on answering my private message? I need one of these ASAP. Quote Link to comment Share on other sites More sharing options...
clear2me Posted July 19, 2018 Share Posted July 19, 2018 Hello i have 3 in stock but i am on Kuwait 🇰🇼 Thank you Quote Link to comment Share on other sites More sharing options...
heeblehob Posted July 21, 2018 Share Posted July 21, 2018 Any of these still available? Quote Link to comment Share on other sites More sharing options...
clear2me Posted July 22, 2018 Share Posted July 22, 2018 Hello i have 3 in stock can you pay 25$ shipping 4-7 day to You ? Thank you Quote Link to comment Share on other sites More sharing options...
Ben's Z Posted July 24, 2018 Share Posted July 24, 2018 Sent you a PM Quote Link to comment Share on other sites More sharing options...
softopz Posted July 29, 2018 Share Posted July 29, 2018 On 7/24/2018 at 2:15 PM, Ben's Z said: Sent you a PM I have sent a couple of PM's my guess is hes busy or not doing this. If hes not doing this anyone have the file I could cut them locally I could use a set for my ls coil swap. Quote Link to comment Share on other sites More sharing options...
Dr. photon Posted November 19, 2019 Share Posted November 19, 2019 Are these still available? I'd like to purchase one if they are. Quote Link to comment Share on other sites More sharing options...
clear2me Posted November 20, 2019 Share Posted November 20, 2019 Yes sent you a pm Quote Link to comment Share on other sites More sharing options...
clear2me Posted November 26, 2019 Share Posted November 26, 2019 More in stock if any interested😊 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.