gvincent Posted November 3, 2019 Share Posted November 3, 2019 Started to put together my long stalled turbo swap in the 78 280Z and need some advice and pictures on where did you mount your AFM. I am keeping the AC and have an Intercooler so that doesn't leave much real estate for the Big AFM Quote Link to comment Share on other sites More sharing options...
cgsheen Posted November 3, 2019 Share Posted November 3, 2019 When I had such a thing, I didn't "mount" it. It just had to be hung as part of my cold air intake. I didn't have an intercooler at that time so that made it a little easier. I feel you, the logistics are tough. You may not want to hear this but your best option will probably be: don't use an AFM. Quote Link to comment Share on other sites More sharing options...
Zetsaz Posted November 3, 2019 Share Posted November 3, 2019 I'm with cgsheen on this. The AFM works reliably when properly set up, but will always be antiquated and hold you back. The best solution is to go to a standalone ecu so you don't have to deal with it Quote Link to comment Share on other sites More sharing options...
gvincent Posted November 4, 2019 Author Share Posted November 4, 2019 well don't have the money to go with a different ECU. I think either mount it through Radiator support in front of radiator ,intercooler, condenser or cut fender well and fab a shelf maybe. I know there are pictures around but the search is not working keep getting server error message. Quote Link to comment Share on other sites More sharing options...
cgsheen Posted November 4, 2019 Share Posted November 4, 2019 Do you have the engine running currently (or have you had it running)? (I know it won't run without the AFM... my question is have you either verified the engine runs well with the ECCS harness that you have (perhaps by mocking it up on a temporary basis)… ) Obviously it's yours to do what you will, but I would caution against cutting anything up to make a permanent AFM mount if you haven't thoroughly tested your ECCS system and you are satisfied with it's operation. Quote Link to comment Share on other sites More sharing options...
rossman Posted November 6, 2019 Share Posted November 6, 2019 (edited) I purchased a 280z back in 2007 that had the AFM mounted in front of the radiator. It worked reasonably well. The setup was prone to knock @ only 5 psi of boost but I believe that was caused by the lack of an intercooler and the crappy old school turbo. I considered running water/meth injection until I figured out that I was going to be severely restricted by the stock fuel injection system. https://photos.app.goo.gl/jpC3ZFQfBXYC3DgT9 Edited November 6, 2019 by rossman Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.