rk2334 Posted June 17, 2020 Share Posted June 17, 2020 (edited) Hey Forum I would like to share my swap bought 300z with 2jz but always overheated and I cant drive for long distance Edited June 17, 2020 by rk2334 Quote Link to comment Share on other sites More sharing options...
rk2334 Posted June 17, 2020 Author Share Posted June 17, 2020 (edited) Engine and trans out ,clean and paint the bay Fabricating custom oil pan with rear sump, -10 AN fitting Oil Port Fitting for External Oil Filter, Depth: 6" at sump, 1 5/8" front half of pan also oil pickup extended and modified. Edited June 17, 2020 by rk2334 Quote Link to comment Share on other sites More sharing options...
ISPKI Posted June 17, 2020 Share Posted June 17, 2020 What are your plans for the 2jz? Quote Link to comment Share on other sites More sharing options...
rk2334 Posted June 17, 2020 Author Share Posted June 17, 2020 (edited) exchanged with RB28 HKS Edited June 17, 2020 by rk2334 Quote Link to comment Share on other sites More sharing options...
rk2334 Posted June 17, 2020 Author Share Posted June 17, 2020 (edited) custom make engine mounts Edited June 17, 2020 by rk2334 Quote Link to comment Share on other sites More sharing options...
rk2334 Posted June 29, 2020 Author Share Posted June 29, 2020 (edited) install motor Making adaptor for rb20 gearbox Edited July 2, 2020 by rk2334 Quote Link to comment Share on other sites More sharing options...
rk2334 Posted July 25, 2020 Author Share Posted July 25, 2020 adapter plate done and fit with gearbox Quote Link to comment Share on other sites More sharing options...
rk2334 Posted July 25, 2020 Author Share Posted July 25, 2020 Quote Link to comment Share on other sites More sharing options...
rk2334 Posted August 8, 2020 Author Share Posted August 8, 2020 Stainless headers fabricated Quote Link to comment Share on other sites More sharing options...
rk2334 Posted August 10, 2020 Author Share Posted August 10, 2020 Installing radiator three rows and fabricating fan shroud for flex fan3000cfm Quote Link to comment Share on other sites More sharing options...
rk2334 Posted August 10, 2020 Author Share Posted August 10, 2020 Installing 42 Row Engine Oil Cooler with AN10 Oil Filter Relocation Adapter Quote Link to comment Share on other sites More sharing options...
calZ Posted August 11, 2020 Share Posted August 11, 2020 Pusher fans don't really need shrouds. Is there any air gap between the sheet metal and the rad? From the picture it looks like all you're doing is blocking flow. Quote Link to comment Share on other sites More sharing options...
Neverdone Posted August 11, 2020 Share Posted August 11, 2020 Can agree. You want a shroud for a puller fan so that all the air is evenly being directed toward the fan and it can truely suck the air through it. Putting a shroud on the front just blocks airflow. Quote Link to comment Share on other sites More sharing options...
rk2334 Posted August 13, 2020 Author Share Posted August 13, 2020 Thanks for comments. I will make holes in shroud. There is a seal tape between shroud and rad to close the gap, also planning to install one 12inch slim puller fan. Quote Link to comment Share on other sites More sharing options...
rk2334 Posted September 1, 2020 Author Share Posted September 1, 2020 Replaced the old clutch master cylinder with new OEM Nissan patrol one and made flange to make it fit Quote Link to comment Share on other sites More sharing options...
rk2334 Posted November 30, 2020 Author Share Posted November 30, 2020 (edited) Fill and restore the cracked dashboard and interior parts also trying to replace broken ac with universal one. Closed all firewall holes; ac pipes, heater pipes and ecu harness hole, and made one hole for all from battery tray side. And battery moved to rear side Edited December 1, 2020 by rk2334 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.