Fast Floridian's 240Z Track Build

[FastFloridian]

Got the subframe braces on, seemed simple but ran into some issues. Bolt to the subframe is too long, bottoming out in the brace, I cut the bolt down and used a spacer to help with alignment. Then tightening up to where it connects to tension arm bracket and snapped those bolts. Alignment from where I drilled the holes was off a little and I was over tightening them, ugh. Luckily I had two more bolts. Had to take the tension arm off to get one of the carriage bolts on. But it’s complete now, nice and sturdy.

[FastFloridian]

[jhm]

Apex's choice of carriage bolts is unusual....can't say I've ever seen really seen them used in custom suspension builds before.  Do you think they were chosen for convenience, with the self-locking features in the mounting brackets?  

 

Great progress.....really enjoying your updates!  Keep 'em coming!!  👍👍

[FastFloridian]

For the track attack upper control arm plate the carriage bolts are a must because of their plate design, it completely covers the bolts, so no way to tighten. But some of the others are iffy. The two I broke, didn’t need to be carriage bolts, but it would have tight if they weren’t, and the tension rod bracket  was probably needed for clearance to the bushing. Their brackets could have been designed to use regular bolts if they made them a little bigger, but that’s what they went with. Over all I’m pretty happy with it and how’s it’s coming together, but there are still some improvements they could make for easier installation.