BirdmanZ Posted January 18, 2008 Share Posted January 18, 2008 I am going to start building my single turbo manifold for my RB to use a T4 flanged T61 turbo. If I can get a couple guys interested in something like this I'd be willing to make a Jig and make a few. It would be able to fit both the RB26 and 26, T4 twinscroll manifold. So how 'bout it. Any interest? Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted January 18, 2008 Share Posted January 18, 2008 It all depends.... cost, material, design, etc..... Quote Link to comment Share on other sites More sharing options...
jdizzy204 Posted January 18, 2008 Share Posted January 18, 2008 id be interested depending on cost, design and obviously bang for the buck versus existing manifolds. Quote Link to comment Share on other sites More sharing options...
ZDrifter Posted January 18, 2008 Share Posted January 18, 2008 I would be very interested aswell. Afterall I am building a track car Quote Link to comment Share on other sites More sharing options...
BirdmanZ Posted January 18, 2008 Author Share Posted January 18, 2008 Alright! My spare cylinder head should be here within the next week so i'll get crackin on it so i have something to show you guys. Quote Link to comment Share on other sites More sharing options...
Duffy Posted January 18, 2008 Share Posted January 18, 2008 if you need somebody close by to test out the rb25 clearance in a 280 ill make the trip from Hagertown.:mrgreen: Quote Link to comment Share on other sites More sharing options...
BirdmanZ Posted January 18, 2008 Author Share Posted January 18, 2008 Hey Duffy, didn't realize you were so close. I might end up taking you up on that seeing as how I'm getting ready to pull the engine out of my Z. Quote Link to comment Share on other sites More sharing options...
synthtk Posted January 23, 2008 Share Posted January 23, 2008 It all depends.... cost, material, design, etc..... What he said Quote Link to comment Share on other sites More sharing options...
BirdmanZ Posted January 23, 2008 Author Share Posted January 23, 2008 I got the spare cylinder head today and the material is on the way. I hope to have something in a week or two. Any one know who still sells a brand new manifold for the RB other than Full-Race and SSAutotrash? Quote Link to comment Share on other sites More sharing options...
Evan Purple240zt Posted January 23, 2008 Share Posted January 23, 2008 6boost out of austrailia(sp). There was a group buy on nico on these. Evan Quote Link to comment Share on other sites More sharing options...
05plsrt-4 Posted January 23, 2008 Share Posted January 23, 2008 I recently purchased a brand new exotic speed manifold for my RB25. I'm very inpressed with the quality of it. I think this is the correct link http://www.exoticspeed.ca/product_info.php?products_id=559 It is very well built. It uses CNC flanges, not cast like the ssautocrap. It uses a twin scroll T4 flange.The bolt holes lined up perfectly. It fits my T04R without any issues. Quote Link to comment Share on other sites More sharing options...
RB26240Z Posted June 27, 2008 Share Posted June 27, 2008 Is this still on? if it is i'd be interested... thnx Quote Link to comment Share on other sites More sharing options...
Z24O Posted June 28, 2008 Share Posted June 28, 2008 6boost out of austrailia(sp). There was a group buy on nico on these. Evan not sure the std 6BOOST high mount will work with a Z,i have one of his RB30 high mounts and from my measurements the turbo would hit the hood on the RB30 in my 240Z,the rb25/26 manifold looks like it would have the same problem....also that was only using a baby GT30 turbo,anything bigger would be even more of a problem anyone used one of the 6BOOST manifolds in their Z and can confirm the fit? BTW his manifolds are top shelf,steam pipe construction with lifetime warranty a low mount may be another option but very squeezy to work on at a guess Quote Link to comment Share on other sites More sharing options...
BirdmanZ Posted June 28, 2008 Author Share Posted June 28, 2008 Is this still on? if it is i'd be interested... thnx I have it about half finished. My free time is getting thinner by the day it seems. I hope to finish it up sometime fairly soon. Brandon Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted June 28, 2008 Share Posted June 28, 2008 I am going to start building my single turbo manifold for my RB to use a T4 flanged T61 turbo. If I can get a couple guys interested in something like this I'd be willing to make a Jig and make a few. It would be able to fit both the RB26 and 26, T4 twinscroll manifold. So how 'bout it. Any interest? I bought a pretty nice single manifold from a guy in Japan for $400 delivered, but I'd take one of yours too if avail. This pic below is of the manifold shown on a RB motor as a test fit shot over in Japan before sending it to me. Quote Link to comment Share on other sites More sharing options...
streeteg Posted June 28, 2008 Share Posted June 28, 2008 Wow thats a cool lookin setup. I like the twin outlet for hte WG. Nice purchase.... any more info on it? Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted June 28, 2008 Share Posted June 28, 2008 Wow thats a cool lookin setup. I like the twin outlet for hte WG. Nice purchase.... any more info on it? Here is a link with some info> http://forums.nicoclub.com/zerothread?id=326659 Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted July 13, 2008 Share Posted July 13, 2008 I am going to start building my single turbo manifold for my RB to use a T4 flanged T61 turbo. If I can get a couple guys interested in something like this I'd be willing to make a Jig and make a few. It would be able to fit both the RB26 and 26, T4 twinscroll manifold. So how 'bout it. Any interest? Brandon, any updates worth mention? I'm still watching for you to give us some progress news.... Quote Link to comment Share on other sites More sharing options...
BirdmanZ Posted July 13, 2008 Author Share Posted July 13, 2008 Sorry Joel, been really busy lately. Getting ready to move again for the 4th time in the past 12 months. I have made a little more progress although it is all still tacked in place. I'll try and snap some pics this week. Thanks, Brandon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.