David87LS Posted February 24, 2008 Share Posted February 24, 2008 Anyone give me a lead on where I can get a replacement floor pan for my 83 coupe? I am putting new carpet in it this w/e and as im pulling out the old stuff, what I thought were pin hole were more like baseball bat holes. I did the usual search: Black Dragon, Too Intense, etc. but no cigar. I read how one person POR 15'd and fiber glassed it but dont know how long that will last. Ironically the Passenger looks okay. Quote Link to comment Share on other sites More sharing options...
cockerstar Posted February 24, 2008 Share Posted February 24, 2008 Just cut/bend and weld in some sheet Quote Link to comment Share on other sites More sharing options...
David87LS Posted February 24, 2008 Author Share Posted February 24, 2008 I will if I have to but to replace the floor pan would be a better fix. thats if they make a replacement pan Quote Link to comment Share on other sites More sharing options...
zmaster Posted February 25, 2008 Share Posted February 25, 2008 go to menards they have large shets of steel to make your own floor pan....thats what i'm doing, and i am putting bead rolls in the metal to make it more rigid, and stronger. Quote Link to comment Share on other sites More sharing options...
007max Posted February 25, 2008 Share Posted February 25, 2008 You could always have one cut out of a rust free car at a junkyard. Thats likely what I'll have to do. The front of my passenger's side footwell, where it goes up to meet the firewall, is completely rotted out. Quote Link to comment Share on other sites More sharing options...
83zed owner Posted February 25, 2008 Share Posted February 25, 2008 You could always have one cut out of a rust free car at a junkyard. Thats likely what I'll have to do. The front of my passenger's side footwell, where it goes up to meet the firewall, is completely rotted out. ill do wat he says. Quote Link to comment Share on other sites More sharing options...
mike240zt Posted February 25, 2008 Share Posted February 25, 2008 Zeddfindings makes a decent replacement pan. http://www.datsunzparts.ca/start.htm I used one of his pans some time ago and it worked out great. looks awesome. Was the very best thing around when i did my floor pan. Probably still is. He makes a zx pan to. Quote Link to comment Share on other sites More sharing options...
stony Posted February 25, 2008 Share Posted February 25, 2008 Any specs on the type a sheet metal that one should use to make thier own pans? Quote Link to comment Share on other sites More sharing options...
Brad-ManQ45 Posted March 3, 2008 Share Posted March 3, 2008 Ibelieve Zeddfindings uses 16 guage...Thicker than stock. Quote Link to comment Share on other sites More sharing options...
itsaprothing Posted March 7, 2008 Share Posted March 7, 2008 MJP auto has them i'm pretty sure this is what you were looking for? http://www.mjpshop.co.uk/product_info.php?id=&pid=316 Quote Link to comment Share on other sites More sharing options...
mudtoy1986 Posted April 16, 2008 Share Posted April 16, 2008 thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.