Bigdeezs Posted May 27, 2009 Share Posted May 27, 2009 Went to California Speedway's 1/4 track for Memorial day for some chillen, BBQ'n and racin. Three LSx Zs showed up along with a 469 rwhp RB26 Datsun. Mine is the primer gray Z and USA3776 is the blue one(didnt run). ColtGT4g63, with the orange Z came all the way up from San Diego with some buddies to run his! The air temp got up into the low 80s and density altitude was about 3600ft at midday but I still was able to run my new best of 11.470@122 with a 1.843 60ft (on 235/45/17 Continentals): http://www.youtube.com/watch?v=PfkXmskhvfY. I also got about 25mpg on the 140 mile roundtrip (not including racing:-P). ColtGT4g53 ran a best of 10.9@124 with a 1.563 60ft! (hope you dont mind me posting this Dave ) oops howd that get in there This was the RB26 Datsun...one of coltgt45's buddies from San Diego also. He had some issues but got a few runs. Not sure what his best was. Quote Link to comment Share on other sites More sharing options...
janaka Posted May 27, 2009 Share Posted May 27, 2009 Dear lord those thigs squat! Very nice photo's! Looks like a blast! Quote Link to comment Share on other sites More sharing options...
blueshark123 Posted May 27, 2009 Share Posted May 27, 2009 Very nice pics and nice times! Ill have to take a look at the vids when I get home. So you managed to cut a 1.843 60ft on a 235/45/17 street tire?? What tires and setup is ColtGT4g53 running if you dont mind me asking? Quote Link to comment Share on other sites More sharing options...
Magnum380Z Posted May 27, 2009 Share Posted May 27, 2009 good videos it looks like you guys had some good times ! Quote Link to comment Share on other sites More sharing options...
ColtGT4g63 Posted May 28, 2009 Share Posted May 28, 2009 Those are some awesome pics! Of course I don't mind you posting my times / video's. That's what they're there for. What tires and setup is ColtGT4g53 running if you dont mind me asking? I've got some 26 x 8.5 x 15 Mickey Thompson ET drags mounted on some stock wheels. I'm using the MT tubes as well, along with some summit racing wheel Bolts to keep the rim from spinning inside the tire. Rear suspension is Tokico blue struts with QA1 175lb spring rates. The springs are sitting on some Cosmo coil over adjustable sleeves. And diff set up is the Q45 with custom axles. Chris had a SERIOUS launch before his car broke. I swear, one more mm and the front tires would be off the ground. Quote Link to comment Share on other sites More sharing options...
Guest Gr8White Posted May 28, 2009 Share Posted May 28, 2009 Nice times, gives me some hope that I'll be able to hook mine up too! Quote Link to comment Share on other sites More sharing options...
jgkurz Posted May 28, 2009 Share Posted May 28, 2009 Those are some awesome pics! Of course I don't mind you posting my times / video's. That's what they're there for. I've got some 26 x 8.5 x 15 Mickey Thompson ET drags mounted on some stock wheels. I'm using the MT tubes as well, along with some summit racing wheel Bolts to keep the rim from spinning inside the tire. Rear suspension is Tokico blue struts with QA1 175lb spring rates. The springs are sitting on some Cosmo coil over adjustable sleeves. And diff set up is the Q45 with custom axles. Chris had a SERIOUS launch before his car broke. I swear, one more mm and the front tires would be off the ground. Having a street driven Z that run's 10's is impressive. Your car gives me hope I can get into the 10's if I go to the ET drag tires. Is your car certified for the 10's (roll bar, driveline lop, etc...) If not, did the track officials hassle you? Quote Link to comment Share on other sites More sharing options...
blueshark123 Posted May 28, 2009 Share Posted May 28, 2009 Those are some awesome pics! Of course I don't mind you posting my times / video's. That's what they're there for. I've got some 26 x 8.5 x 15 Mickey Thompson ET drags mounted on some stock wheels. I'm using the MT tubes as well, along with some summit racing wheel Bolts to keep the rim from spinning inside the tire. Rear suspension is Tokico blue struts with QA1 175lb spring rates. The springs are sitting on some Cosmo coil over adjustable sleeves. And diff set up is the Q45 with custom axles. Chris had a SERIOUS launch before his car broke. I swear, one more mm and the front tires would be off the ground. Very nice! What mods do you have done and how much power are you making? What are your front spring rates? Quote Link to comment Share on other sites More sharing options...
ColtGT4g63 Posted May 28, 2009 Share Posted May 28, 2009 Having a street driven Z that run's 10's is impressive. Your car gives me hope I can get into the 10's if I go to the ET drag tires. Is your car certified for the 10's (roll bar, driveline lop, etc...) If not, did the track officials hassle you? Thanks dude, I have an 8 point cage, harnesses, drive shaft loop, open lug nuts, metal valve stems/caps, fire resistant jacket, battery under the hood. Seems like I've got all that you would need, but the tech guy told me that I could not run under an 11.5 or else I would be kicked out. After running sun 11.5, 6 times in a row the lady who gives you the time slips told me that she was asked to check my car and make sure I've got a cage, and a fire jacket. Once she saw it she told me to go have some fun. Some people had big problems with the tech there, and some people passes with flying colors. Very nice! What mods do you have done and how much power are you making? What are your front spring rates? Front springs are a 125lb spring rate. I've got just about every bolt on I can get. I've got PRC stage 2.5 truck heads on there. CNC ported with biggie valves. Fast 92mm intake and PTM 92mm throttle body, Magic Stick 3 cam with a 113LSA, Dual 3" exhaust with an X pipe. 36lb / hr. injectors. I would guess I'm making somewhere in the 450 hp range. I'll be getting it dynoed sooner then later. I'm at the point where the next mod is going to get expensive, stroker motor... Super charger... Nitrous? Turbo again? Hahaha Quote Link to comment Share on other sites More sharing options...
blueshark123 Posted May 28, 2009 Share Posted May 28, 2009 Front springs are a 125lb spring rate. I've got just about every bolt on I can get. I've got PRC stage 2.5 truck heads on there. CNC ported with biggie valves. Fast 92mm intake and PTM 92mm throttle body, Magic Stick 3 cam with a 113LSA, Dual 3" exhaust with an X pipe. 36lb / hr. injectors. I would guess I'm making somewhere in the 450 hp range. I'll be getting it dynoed sooner then later. I'm at the point where the next mod is going to get expensive, stroker motor... Super charger... Nitrous? Turbo again? Hahaha Ok so this was done NA. I love it. Go nitrous man the stock bottom end can take a 100-150 shot no problem and it's cheap. I'm hoping to run 10s NA as well and 9s with juice. Quote Link to comment Share on other sites More sharing options...
Bigdeezs Posted May 28, 2009 Author Share Posted May 28, 2009 ColtGT4g63's run from the stands... http://www.motorgen.com/vid/showphoto.php/photo/935/cat/535 (Dave if you want this vid (and maybe others) of your car in hi res I think they will email it to you if you sign up for their site) same pics REAL BIG..lol: http://www.motorgen.com/pic/data/834/IMG_0045.JPG http://www.motorgen.com/pic/data/834/IMG_0141.JPG http://www.motorgen.com/pic/data/834/IMG_0044.JPG http://www.motorgen.com/pic/data/834/IMG_0152.JPG Me vs My girlfriends 2002 WS6: longtubes, lid, tune...makes 340rwhp (She's not allowed to be faster than me ) Quote Link to comment Share on other sites More sharing options...
ColtGT4g63 Posted May 29, 2009 Share Posted May 29, 2009 I think nitrous will be my last resort. I like the whole idea of being able to start the car, put in pump gas and go. I don't want to have to worry about "re-filling" my horse power. That video is sweet man!! I would love to get a Hi res copy of it. Just sign up and request it? Quote Link to comment Share on other sites More sharing options...
Z-Gad Posted May 29, 2009 Share Posted May 29, 2009 Looks like a fun day Congrats on the runs Quote Link to comment Share on other sites More sharing options...
Bigdeezs Posted May 29, 2009 Author Share Posted May 29, 2009 I would love to get a Hi res copy of it. Just sign up and request it? From what I've found they go out and film to get people to sign up for their website...I assume cuz they get more $$ from sponsors with more members (asside from the enjoyment and praise)... Heres a quote from LS1tech: A4Blk98SS Teching In My Garage Trader Rating: 0 Join Date: Jan 2002 Location: Orange County, CA Posts: 13 It was fun watching you guys race today. For everyone that came and got a sticker we got all of you at least once and in most cases multiple times. I took 62 videos total today including a couple with the 2010 Camaro. With any luck we should have them up at our site by the end of the week, so keep your eyes open. If anyone wants high resolution copies just send me a PM and I'll get it to you. In addition my wife too hundreds of pictures from the start area. Those should be up in about a week as well. Thanks! Quote Link to comment Share on other sites More sharing options...
Cable Posted April 2, 2010 Share Posted April 2, 2010 ...I have an 8 point cage.... Any chance I could see some pics of your cage? Thanks!! Quote Link to comment Share on other sites More sharing options...
ColtGT4g63 Posted April 2, 2010 Share Posted April 2, 2010 Its basically an Auto power bolt in hoop. The one that bolts into 4 spots total. And I welded two bars that go back off of it. And then two side bars. I don't really have any pics of it, sorry. Could take some if you were interested. Quote Link to comment Share on other sites More sharing options...
Cable Posted April 2, 2010 Share Posted April 2, 2010 Its basically an Auto power bolt in hoop. The one that bolts into 4 spots total. And I welded two bars that go back off of it. And then two side bars. I don't really have any pics of it, sorry. Could take some if you were interested. If you could take a few pics, that'd be great. I'll be building it myself, but I want a few ideas before I dive in head first. Did you notice the car being any stiffer after the install? Thanks again!! Quote Link to comment Share on other sites More sharing options...
sq_creations Posted April 2, 2010 Share Posted April 2, 2010 Looked like a really fun day. Congrates on the new times guys. Quote Link to comment Share on other sites More sharing options...
kgriz Posted April 3, 2010 Share Posted April 3, 2010 Nice pics and vids. Can't wait to post some of my own....One day... Quote Link to comment Share on other sites More sharing options...
SUNNY Z Posted April 5, 2010 Share Posted April 5, 2010 (edited) + 1 for pics of the cage. I have a feeling I'll be needing one this fall. Edited April 5, 2010 by SUNNY Z Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.